1:350 Aircraft Carrier Weser

The aircraft carrier Weser in 1:350 scale is a sizeable plastic kit from Trumpeter, capturing the German project to convert an unfinished heavy cruiser into a carrier.

Scale1:350
Manufacturer Trumpeter
Product EAN9591111000004

Responsibility details are not available.

109.96 € 82.48 €
68.17 € without VAT
−25 % You save 27.48 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Aircraft Carrier Weser, 1:350 Scale (Trumpeter)

A large plastic kit of a ship in 1:350 scale. The real subject is the German Weser project, that is the intended conversion of an unfinished heavy cruiser of the Admiral Hipper class into an aircraft carrier. The work was never completed and the vessel never entered service, so the model captures the projected state as the manufacturer reconstructs it. In 1:350 scale this is a long and fairly demanding model, and in a display case it takes up room to match.

The real subject

The basis was to be the hull structure of the heavy cruiser Seydlitz, whose construction had been halted and whose upper works were to give way to a full-length flight deck with an island superstructure on the starboard side. The conversion reckoned with a hangar, elevators and the equipment needed for operating carrier aircraft. The project remained unfinished and its final form differs from source to source, so approach the model as a reconstruction of a design rather than as a vessel that existed in completed form. That is exactly what makes the subject interesting for collectors looking for a model outside the usual run of kits.

Building and painting tips

Work in assemblies: the hull and the deck first, and only then the superstructure and the small fittings. Check the long hull on a flat surface before gluing, so that no sag appears anywhere. It is practical to paint the flight deck separately and to attach it last, because masking it is otherwise harder. On large areas an airbrush and a fine shading of the individual panels look good. The railings, ladders and other fine items call for tweezers and cyanoacrylate; anyone who wants to go further can reach for separately sold photo-etched accessories. Stand the finished model on a stand or in a display case where it will not be stressed by its own length.

Who the model is for

  • Collectors of ship models in 1:350 scale
  • Those interested in projects never carried out and in unusual subjects
  • More experienced modelers who can cope with a long hull and a large deck
  • Builders who like to go on completing a model with photo-etched parts

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It was a project to convert an unfinished heavy cruiser into an aircraft carrier. The work was halted and the vessel was never completed, so the model captures the projected state.

In 1:350 scale this is a long model of a large vessel. The exact dimensions are not stated here, but reckon on needing a roomy display case.

Rather not. The long hull, the large flight deck and the quantity of small fittings make demands on patience and on gluing straight, so an experienced hand suits it better.

Yes. For ship models in 1:350 scale, photo-etched railings, ladders and other accessories are commonly sold and can be bought separately.

Last seen

1:350 Aircraft Carrier Weser-25 %Stock ClearanceFavorite
TrumpeterTR056331:350

1:350 Aircraft Carrier Weser

The aircraft carrier Weser in 1:350 scale is a sizeable plastic kit from Trumpeter, capturing the German project to convert an unfinished heavy cruiser into a carrier.
3 left
109.96 €82.48 € You save 27.48 €
RYE FIELD MODELRM30361:35

1:35 M50/M51 Super Sherman workable tracks (3D printed)

Workable tracks in 1:35 scale for models of the M50 and M51 Super Sherman, made by 3D printing. The links are joined one by one.
In stock
31.96 €
BANON DESIGNBAN003-A

BAN003 imbus round head 0,5mm - 0,7mm

A collective item with the finest diameters of rounded heads with an Allen recess, a range of 0.5 mm to 0.7 mm, for the smallest details of a model.
In stock
10.36 €
MiniartMA370331:35

1:35 T-34/85 SEA STAR WHEELS SET

A set of sea star type road wheels for the T-34/85 in 1:35 scale is a plastic accessory from the maker MiniArt. It is not a tank kit: these are wheels with which the form of the running gear is refined.
In stock
10.36 €
AIMSAIMS48P0501:48

1:48 Oxygen hose - also good for braided engine cable (1 piece)

1:48 Oxygen hose is one piece of imitation braided oxygen hose from the AIMS brand, usable as braided engine cable as well.
In stock
3.96 €
AMMO of Mig JimenezA.MIG-7500

Oilbrusher Flesh Tones Set

AMMO Oilbrusher Flesh Tones Set is a set of oil paint pens with an applicator brush in the cap, intended for the shades of human skin.
In stock
9.96 €
VallejoVALSC2301:35

1:35 Damaged Roof Section and Tiles

Damaged roof section and tiles 1:35 by Vallejo: a piece of broken roof and twelve European pattern tiles for dioramas.
In stock
14.76 €
Quinta StudioQL480081:48

1:48 German WWI 4-Colour Lozenge (lower surface)

A decal sheet with the four-color lozenge pattern for the lower surfaces of German First World War aircraft, in 1:48 scale.
In stock
5.16 €
AFV ClubAFV350331:35

1:35 T84 Workable Track Link M4 Sherman HVSS (Rubber Type)

T84 Workable Track Link M4 Sherman HVSS (Rubber Type) 1:35 from AFV Club is a set of workable individual track links of the rubber type for models of the M4 Sherman tank with HVSS running gear.
In stock
13.56 €
New WareNWAM09111:48

1:48 Douglas B-26K Counter Invader BASIC kabuki masks

Kabuki masks Douglas B-26K Counter Invader BASIC 1:48 from New Ware. Precisely cut masks for the cockpit glazing and the wheels of the counter-insurgency attack aircraft.
In stock
5.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.