29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

1:350 USS Indianapolis (For Academy 14107)

A 1:350 wooden deck for the heavy cruiser USS Indianapolis is an adhesive veneer piece with pre-printed plank laying that is glued straight onto the plastic deck of the kit. It is intended for the Academy 14107 kit.

Scale1:350
Manufacturer Artwox Model
Product EAN8591111000000

Responsibility details are not available.

17.16 €
14.18 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A 1:350 USS Indianapolis wooden deck from Artwox Model

This is not a kit but an aftermarket accessory. The thin wood veneer is cut to the shape of the deck surfaces of one specific kit, has an adhesive layer on the back and the laying of the individual planks pre-printed on the face. Once glued on it replaces the plastic deck with its engraved decoration and gives the model a material look that is hard to achieve by painting plastic alone.

Check the match before you buy

The set is cut for the Academy 14107 kit. Deck shapes differ between manufacturers and between releases of the same cruiser and the pieces are not interchangeable, so check in advance that you are building that version of the model. Note too that there is often more than one deck variant for one model, with a different shade of wood or a different dated state of the ship: decide by the whole name of the item, not just by the name of the ship.

Gluing tips

Preparing the plastic is the basis of success. First clear the deck of flash and the remains of the parting line, sand it smooth and degrease it carefully; grease from your fingers is the most common reason why a veneer lifts at the corners after a few weeks. Take the protective film off the adhesive layer in sections, never all at once. Lay the piece on dry first, check its position against the superstructure, the hatches and the breakwater, and only then press from the center out to the edges so that no bubbles form under the veneer. Trim overhangs with a new, really sharp blade: a blunt knife tears the wood and frays the edges of the planks.

Who the accessory is for

  • modelers who want a realistic wooden deck on a ship model without laying planks by hand
  • builders who already plan photo-etched railings and other refinements of the surface
  • beginners at superdetailing: gluing a veneer on is a manageable first step
  • display models where the deck is the most conspicuous area of the whole model

The accessory is supplied separately. The plastic kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. This is an accessory, a wooden deck for a plastic kit. The kit itself has to be bought separately.

No. The pieces are cut for the Academy 14107 kit. Check before you buy that you are building that version.

It is not necessary, as the veneer is surface-treated from the factory. A thin coat of matte varnish will, however, protect the deck during the rest of the work on the model and unify the shade.

The adhesive layer on the back of the piece itself. The plastic under it has to be smooth, dry and degreased, otherwise the joint will give way in time.

Last seen

Artwox ModelAW100861:350

1:350 USS Indianapolis (For Academy 14107)

A 1:350 wooden deck for the heavy cruiser USS Indianapolis is an adhesive veneer piece with pre-printed plank laying that is glued straight onto the plastic deck of the kit. It is intended for the Academy 14107 kit.
In stock
17.16 €
Quinta StudioQD721711:72

1:72 A6M3 Zero 3D-Printed & coloured Interior on decal paper (Tamiya)

Quinta Studio 1:72 Mitsubishi A6M3 Zero 3D interior decal is a color 3D decal of the cockpit on a decal backing paper; after a brief soak it slides onto the part.
In stock
5.96 €
TrumpeterTR022601:32

1:32 Messerchmitt Me 262 A-1a Heavy Armament

A large injection-molded plastic kit of the Messerschmitt Me 262 A-1a Heavy Armament in 1:32 scale from the manufacturer Trumpeter - the fighter version of the jet aircraft with heavy armament.
In stock
41.56 €
KelikRSK32-00381:32

1:32 GR.MK7 Harrier - interior 3D decals for Trumpeter kit

Colored three-dimensional cockpit interior elements for a model of the Harrier GR.Mk.7 in 1:32 scale, shaped for the Trumpeter kit.
In stock
32.76 €
Dead DesignNM721101:72

1:72 Lockheed S-3A Viking - canopy masks for Hasegawa

Painting stencils for the cockpit glazing of a model of the Lockheed S-3A Viking in 1:72 scale . Intended for the Hasegawa kit.
In stock
7.56 €
Aires/QuickboostQB490231:48

1:48 OV-10 Bronco gun barrels

Resin machine gun barrels for the OV-10 Bronco 1:48 are an add-on set of castings from the manufacturer Quickboost for a faithful rendering of the sponson armament.
In stock
4.76 €
1:32 Messerschmitt Bf-108 Taifun wheels-25 %Stock ClearanceFavorite
EduardED6321501:32

1:32 Messerschmitt Bf-108 Taifun wheels

Messerschmitt Bf 108 Taifun wheels 1:32 is a set of replacement resin wheels from Eduard. It is not a kit or photo-etch — they are cast replacement parts that are swapped for the plastic wheels of a model.
4 left
10.40 €7.80 € You save 2.60 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.