Hose joints 0.8 mm, set 1 is a collection of small fittings for convincing plumbing runs on models in 1:20 scale.
Responsibility details are not available.
A set of small joints and end fittings for hoses of 0.8 millimeter outside diameter, intended for models in 1:20 scale. It imitates the screwed joints of the fuel, brake and cooling lines of racing cars. The package contains several kinds of part, so a whole run can be put together from it. It is not a kit but a detail accessory for the build.
Try the whole run out dry first and only then cut the hose to length. Cut the ends square with a fresh blade, as an angled cut will seat crooked in the joint. Paint the joints before fitting them; once assembled you can no longer reach them with a brush. A metal shade on the fitting stands out against a dark hose. Glue them with cyanoacrylate glue dosed with a pin, as an ordinary drop is far too much for a joint this small.
The set is supplied on its own; neither the model nor the paints are included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
