Hose joints 0.8 mm, set 3 is an extensive collection of end fittings completed with a meter of braided line for building whole runs.
Responsibility details are not available.
A set of tiny joints and end fittings for hoses of 0.8 millimeters outside diameter. Compared with the basic set it is richer: it holds more kinds of part in larger numbers and, according to the manufacturer, adds a meter of braided line from which the hose is made. The parts are printed in resin on a three-dimensional printer. It is not a kit but a detail accessory for the build.
Try the routing dry first and only then cut the line to length. Make the cut square with a fresh blade. Paint the end fittings before fitting them, because once assembled you cannot get to them with a brush, and let a metallic shade stand out against the dark braid. The printed parts have fine supports that have to be cut off and the area leveled; do not look for casting blocks or mold release agent on them. They are glued with super glue dosed with a pin.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
