1:24 Central hex nut and axle hub for BBS rims - type 1 from Decalcas is an accessory with a central nut and an axle hub for BBS wheels.
Responsibility details are not available.
An accessory for models in 1:24 scale focused on the center of the wheel: the central hex nut and the axle hub. The name says the solution is intended for BBS wheels, and the marking type 1 gives the version. It is not a set of wheels but the parts added to them.
Racing cars leave fixing by several studs behind and move to a single central nut, because every second counts when a wheel is changed. An impact wrench fits the hex, one press and the wheel is off. Behind the nut the hub stays visible with its drive pegs, which the wheel engages, and it is exactly that pair that gives the center of the wheel the typical look a simplified plastic disc never has. BBS is a brand whose wheels have held their place on circuit and rally cars for decades.
The procedure is always the same: first seat the hub on the axle, check that it lies square, and only then fit the wheel. Glue the nut on after the wheel face is painted, or you will rest the brush against it. The hex stands out when you leave it in a metallic shade and darken the recesses around it slightly. Suggest the traces of the wrench with a small amount of wear exactly on the edges, not across the whole face.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
