A set of civilian seat belts for car models in 1:24 scale. It adds to the interior a detail that a kit on its own usually only suggests.
Responsibility details are not available.
The interior of a car model is visible through the glazing, and the eye looks in it for exactly the things it knows from its owner's own car. Seat belts come first among them: they run the whole height of the pillar and across the seat, so they are conspicuous even once the body is closed. In a kit they tend to be suggested only by shallow relief on the seat, or to be missing altogether, and that is exactly when a separate set saves the situation.
Belts in the civilian form, that is the kind that production passenger cars have, not the multi-point harnesses of racing specials. The 1:24 scale matches the most widespread size of car kits, so the set suits models of road cars across brands and across any period in which belts were already standard equipment.
Finish and paint the interior first and seat the belts only at the end, so that they do not get clogged with paint. Route the strap the way it would hang in reality: from the pillar loosely over the shoulder and with a slight sag above the seat, not taut as a string. Attach it with a drop of glue chosen according to the material of the parts, and cut the surplus material away with a sharp blade a little clear of the part. Wash and degrease the parts before painting.
For builders of car models in 1:24 scale who are fine-tuning an interior, and equally for a build of a car with an open body, where the cabin is visible. Paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!