20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more

1:43 ZIL-130 V1 with APPA-4

ZIL-130V1 with the APPA-4 trailer is a kit of a Soviet airport rig in 1:43 scale from the maker AVD Models. The semi-tractor is paired with a low-floor trailer that carried passengers across the airport apron.

Scale1:43
Manufacturer AVD Models
Product EAN7591111783594

Responsibility details are not available.

47.96 €
39.64 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

ZIL-130V1 with the APPA-4 trailer in 1:43 scale from AVD Models

The kit captures the whole rig: the ZIL-130V1 semi-tractor and the APPA-4 trailer. 1:43 is the classic car scale, so the finished combination fits a cabinet among collector metal models of cars and trucks. Thanks to the length of the rig it is a striking piece that draws the eye on a shelf at once.

The real subject

The ZIL-130 from the Moscow Likhachev plant was among the most widespread Soviet trucks. The version with V1 in the designation is a semi-tractor meant for pulling trailers, so a vehicle with a shorter frame and a fifth wheel in place of a flatbed body. The APPA-4 trailer came about in 1971 at the Riga civil aviation plant and from 1973 was used precisely in combination with the two-axle ZIL-130V1 tractor. It carried passengers between the terminal building and the aircraft, for which it had a low floor and side doors along the body. This is therefore typical airport ground equipment, not a road bus.

Building and painting tips

The rig builds well in units: the chassis and cab of the tractor separately, the body of the trailer separately. Try fitting the parts dry first and only then glue them, because on a rig it matters that the fifth wheel of the tractor and the kingpin of the trailer line up and that the model stands level on all its wheels. Choose the glue according to the material of the particular part. Degrease the parts before painting and use a primer, so that the large smooth surfaces of the body do not pick out every irregularity. Airport equipment used to be strikingly colorful, so it pays to spray with an airbrush in thin coats and to mask the dividing lines between colors with particular care. Finish the glazing and the trim strips with a brush at the end.

Who the model is for

  • For collectors of Soviet and Russian commercial vehicles in 1:43 scale
  • For builders of airport dioramas and ground handling scenes
  • For modelers who enjoy multi-part tractor and trailer rigs
  • For fans of ZIL vehicles who want a less usual body in their collection

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. This is a rig of a semi-tractor and a trailer. Passengers rode in the APPA-4 trailer across the airport apron between the terminal and the aircraft; it was not a service bus.

It denotes a semi-tractor for trailers, so the version with a shorter frame and a fifth wheel in place of a flatbed body.

The rig has more units than an ordinary simple model, so it suits a modeler who has already tried out gluing and basic painting. The reward is a striking long model for a cabinet.

Yes, airport equipment is a rewarding theme. The rig works well on a flat scene with marked taxi lanes and other ground handling vehicles.

Last seen

AVD Models7076AVD1:43

1:43 ZIL-130 V1 with APPA-4

ZIL-130V1 with the APPA-4 trailer is a kit of a Soviet airport rig in 1:43 scale from the maker AVD Models. The semi-tractor is paired with a low-floor trailer that carried passengers across the airport apron.
In stock
47.96 €
1:72 FuG 212 Lichtenstein C-1 (3D print)
-20 %
Favorite
3DF3DF1072031:72

1:72 FuG 212 Lichtenstein C-1 (3D print)

FuG 212 Lichtenstein C-1, a 3D printed radar in 1:72 is a fine aftermarket replica of the antenna system of the German airborne radar, for models of night fighters.
In stock
8.36 €6.69 € You save 1.67 €
FineMoldsFM411:35

1:35 JGSDF HMV w/Machine Gun (w/2 Figures)

The plastic kit FineMolds 1:35 HMV with a machine gun captures the Japanese high mobility cross-country vehicle. The package also holds two figures. A model to assemble and paint.
In stock
43.96 €
1:48 Tornado ECR German version interior 3D decal (small version) (with 3D-printed resin parts)-25 %Stock ClearanceFavorite
Quinta StudioQD+482041:48

1:48 Tornado ECR German version interior 3D decal (small version) (with 3D-printed resin parts)

A color film set for the interior of a model of the Tornado ECR in the German form, 1:48 scale, in the smaller extent and with additional 3D-printed parts.
5 left
43.96 €32.96 € You save 11 €
AberABR35G311:35

1:35 Grilles for Sd.Kfz. 181 Tiger I

Photo-etched grilles for the Sd.Kfz. 181 Tiger I tank in 1:35 from the Polish manufacturer Aber is a set of photo-etched metal engine compartment grilles and protective screens. It is a detail accessory for a kit, not a model of a tank.
In stock
5.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.