Pre-cut kabuki masks in the wider EXPERT scope for the kit of the Sikorsky H-19A Chickasaw helicopter in 1:48 scale from the AMP company, part number 48022.
Responsibility details are not available.
The Sikorsky H-19A Chickasaw helicopter served from the early 1950s for carrying people and material and for rescue flights. Its appearance is set by the bulky nose, above which the pilot's cabin sits high, and by the slender tail boom. Its glazing is complex in shape, so masking is one of the more laborious parts of the build on this subject. The set is prepared directly for the kit from the AMP company with part number 48022.
The masks are cut from kabuki tape, that is from a fine paper with an adhesive treatment. The tape can be pressed into a slight curve without wrinkling and leaves no adhesive on the surface when removed. The scope is labeled EXPERT, that is wider than the BASIC variant of the same range; the exact list of the individual masks is given in the manufacturer's instructions.
Apply the masks to a degreased surface before spraying and run a blunt tip over the edges so that they adhere along their whole length. It pays to spray a thin covering coat of the underlying color first: any creep is then hidden under the color itself. Take the mask off with tweezers as soon as the paint is dry to the touch, and pull it at an angle along the surface.
The set is for the modeler who wants crisp transitions and does not want to cut the glazing masks by hand. The kit, the paints and the glue are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!