LAST CHANCE! 20% OFF Ends Tonight!

1:48 A-10A Thunderbolt II electronic bays

A set of the bay with the electronic equipment in 1:48 scale for the A-10A Thunderbolt II. It makes it possible to build the model with the service panel swung open and the inside revealed.

Scale1:48
Manufacturer Aires
Product EAN8591111209717

Responsibility details are not available.

10.80 € 8.64 €
7.14 € without VAT
−20 % You save 2.16 €
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The A-10A is a single-seat ground-attack aircraft intended for close support of ground troops. Besides the cockpit and the pylons, a number of service panels on the fuselage are also opened during maintenance, with the electronic equipment stowed behind them. On an aircraft ready for flight these panels are closed, whereas on a machine being worked on, on the apron, they tend to be swung open and you can see inside.

What the set contains

The set makes it possible to show the bay with the electronic equipment open. It brings its own interior of the bay with a three-dimensional relief of the instruments and the supporting frames, which takes the place of the smooth inner side of the kit's fuselage. The panel on the kit part is as a rule only suggested by a groove in the plastic, so it has to be cut out and fitted swung open. Compare the exact position of the cutout and the extent of the work with the manufacturer's instructions and with your own kit beforehand.

  • 1:48 scale, intended for the A-10A
  • the interior of the bay with the electronic equipment
  • a three-dimensional relief of the instruments and the supporting frames
  • it calls for cutting the service panel out of the kit part
  • the parts are not polystyrene, they are bonded with super glue

Building and painting tips

Trace the outline of the cutout first and only then cut, true the edges after the cut with a file and sand the excess down. Cut the excess material on the parts off a little way from the part with a sharp blade. Wash and degrease before painting. Paint and shade the inside of the bay while it is freely accessible. It pays to pick the small instruments out with a dark glaze and a dry brush, otherwise they disappear in the depth. Fit the finished bay only once the surrounding paintwork is done.

Who it is for

The set is for modelers who build the aircraft as a machine under maintenance on the apron or in a diorama with ground crew. On a model with the panels closed it will not come into play. The kit, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The service panel on the kit part is as a rule only suggested by a groove, so it has to be cut out. Trace the outline beforehand and compare the extent of the work with the manufacturer's instructions.

The name does not state a particular kit. Add-on sets of this type are made for a particular kit, so compare the shape and the dimensions with your own beforehand.

No. It makes sense only where you want to swing the panel open and show the inside, that is, on a machine under maintenance on the apron or in a diorama.

The parts are not polystyrene, so plastic cement does not work on them. Use super glue and wash and degrease the surfaces beforehand.

Last seen

1:48 A-10A Thunderbolt II electronic bays
-20 %
Favorite
AiresAIR43551:48

1:48 A-10A Thunderbolt II electronic bays

A set of the bay with the electronic equipment in 1:48 scale for the A-10A Thunderbolt II. It makes it possible to build the model with the service panel swung open and the inside revealed.
In stock
10.80 €8.64 € You save 2.16 €
DK DecalsDK480451:48

1:48 Spitfire Mk.V of Wing Commanders

1:48 Spitfire Mk.V in the markings of wing commanders is a decal sheet from DK Decals. It focuses on machines flown by wing commanders, on which personal markings instead of the usual squadron codes were customary.
In stock
14.36 €
MP Originals Masters ModelsMP480061:48

1:48 M1A2 Abrams 3 v 1 (easy)

1:48 M1A2 Abrams 3 in 1 is a combined package of add-on parts for a kit of the tank you already own, not a standalone model. The designation easy means a simplified fit for less experienced modelers.
In stock
44.76 €
TrumpeterTR066331:200

1:200 WWII US Navy Figures Set

WWII US Navy Figures Set is a set of very small plastic figures in 1:200 scale from the manufacturer Trumpeter.
In stock
7.96 €
Amusing HobbyAH35A0301:35

1:35 SD.Kfz.184 Ferdinand & 16t Strabokran

Amusing Hobby Sd.Kfz.184 Ferdinand and the 16t Strabokran in 1:35 scale is a plastic kit of the heavy tank destroyer together with a gantry crane. A combination made for a striking workshop diorama.
In stock
86.36 €
69.065 Dark Steel Gloss
-20 %
Favorite
VallejoVAL69065

69.065 Dark Steel Gloss

Vallejo Mecha Color Dark Steel is a gloss water-thinnable acrylic dark steel metallic of 17 ml for the metal surfaces of sci-fi models.
In stock
2.60 €2.08 € You save 0.52 €
1:72 Bf 109E-1 „JG.77“
-20 %
Favorite
AZ modelAZ78051:72

1:72 Bf 109E-1 „JG.77“

1:72 Bf 109E-1 JG.77 is a plastic kit of an early fighter aircraft of the Emil series in the markings of the unit given, from the manufacturer AZ model.
In stock
13.96 €11.17 € You save 2.79 €
PeewitPWM1440101:144

1:144 Vampire FB.5 - pro modely Mark I models

Peewit 1:144 mask Vampire FB.5 is a set of precise self-adhesive masks in 1:144 scale for masking the canopy glazing of a model of the Vampire FB.5 jet aircraft.
In stock
3.16 €
1:48 F/A-22A Raptor wheel bays
-20 %
Favorite
AiresAIR45001:48

1:48 F/A-22A Raptor wheel bays

Resin Aires landing gear bays for the F-22 Raptor in 1:48 scale with fine cast detail. It is not a model but a resin detail set for an existing kit.
In stock
16.80 €13.44 € You save 3.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.