Quinta Studio 1:48 AV-8A Late in the smaller variant is a colored interior on decal paper. It is applied over a gloss base.
Responsibility details are not available.
Colored decals for the cockpit of the late version of the AV-8A in 1:48 scale. The name marks them as the smaller variant, that is a narrower selection than in the full version of the same subject. Check the exact difference in the contents on the box.
Elsewhere a decal softener is a common aid for getting a decal around an edge or down into engraving, but on these colored interior sets the manufacturer forbids it, and a decal fixer likewise: the chemicals attack the printed resin and ruin the element. Instead, the sheet is only briefly soaked in lukewarm water, the element is slid off the backing paper and settled onto a gloss clear coat. The decal often wrinkles for a while as it dries — that is normal and it will tighten by itself, and reaching in with tweezers at that moment does more harm than good. If an element does not seat into the engraving, press it down with a cotton swab while the base is still damp. Before the first use, try the procedure on a spare offcut, so that you know how your particular combination behaves.
Paint the cockpit, let the paint cure and brush a gloss clear coat over it — a matte surface is microscopically rough and air would stay in it under the decal. Once dry, unify the interior with a matte or semi-gloss varnish, and only then weather it if you want to.
Paints and varnishes are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!