LAST CHANCE! 20% OFF Ends Tonight!

1:48 D-704 buddy Tank early type (´60-´70)

Brengun 1:48 D-704 buddy tank, early type is a resin pod for refueling in flight. It is a stores accessory to a model of an aircraft, not a kit in its own right.

Scale1:48
Manufacturer Brengun
Product EAN8591111275682

Responsibility details are not available.

12.76 €
10.55 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

D-704 buddy tank of the Early Type in 1:48 Scale

The set brings a resin casting of the D-704 pod, with which carrier aircraft passed fuel to other aircraft in flight. It is not a model of an aircraft nor of its main parts but an accessory, hung under the wing or the fuselage of a finished model. This set captures the early form of the pod as it was used roughly in the 1960s and 1970s. The later form of the same device is issued as a separate item, so choose the matching variant according to the era of your aircraft; that is the only difference between the two sets.

What the container was for

Refueling by the buddy method means that the role of the tanker is taken by an ordinary combat aircraft carrying a detachable pod with a hose and a drogue. Thanks to that a squadron needs no specialized tanker machine, and the outfit can be taken off at any time according to the task. At its rear the pod carries a reel drum with the hose, and at the front a small ram-air turbine that drives the pump. It is precisely these small shapes that decide whether the store looks convincing on a model.

Building and painting tips

Wash the resin parts in warm water with detergent first, so that the remains of the mold release agent disappear; otherwise the paint will not hold. Cut the casting blocks off with a saw or a cutting disc and do not break them. Sand wet and with respiratory protection, as resin dust is not to be inhaled. It is glued solely with cyanoacrylate, since ordinary plastic cement has no effect on resin. Apply a primer before painting and it is better to strengthen the joint of the pylon with a piece of wire, so that the heavier casting holds under the wing.

Who the set is for

  • Builders of carrier-based US Navy aircraft in 1:48 scale.
  • Modelers who want stores matching an older era of service.
  • Those who have worked with resin and cyanoacrylate before.
  • Collectors who are putting a faithful set of stores together for their model.

The accessory is supplied unassembled and unpainted. The kit, glue and paints are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The two variants differ by era of service: the early form corresponds roughly to the 1960s and 1970s, the late form to the later decades. Go by the period in which your aircraft flew.

It is not. It is a resin store hung under a finished model. The kit of the aircraft has to be bought separately.

Solely with cyanoacrylate. Before gluing and before painting, wash the parts in warm water with detergent and apply a primer, otherwise neither paint nor glue will hold.

With a pod of this type one piece per aircraft is normally carried. The number of pieces in the package follows the manufacturer's details.

Last seen

BrengunBRL481601:48

1:48 D-704 buddy Tank early type (´60-´70)

Brengun 1:48 D-704 buddy tank, early type is a resin pod for refueling in flight. It is a stores accessory to a model of an aircraft, not a kit in its own right.
In stock
12.76 €
1:72 OV-10A/B/C Bronco propellers
-20 %
Favorite
Aires/QuickboostQB726771:72

1:72 OV-10A/B/C Bronco propellers

Resin propellers for the OV-10A, OV-10B and OV-10C Bronco in 1:72 scale are a replacement accessory for a plastic kit. They offer thinner blades and finer detail of the propeller hub.
In stock
6.36 €5.09 € You save 1.27 €
TrumpeterTR095871:35

1:35 Russian T-80BVM MBT

The plastic kit Trumpeter T-80BVM in 1:35 scale — the Russian upgraded main battle tank with Relikt explosive reactive armor.
In stock
50.36 €
1:72 Ch-46 D  Front engine  + cockpit
-20 %
Favorite
Black Dog modelBDA720671:72

1:72 Ch-46 D Front engine + cockpit

1:72 CH-46D front engine section and crew cabin is a resin detail set from Black Dog for a plastic model of the tandem-rotor helicopter. The base kit is not included in the package.
In stock
15.96 €12.77 € You save 3.19 €
1:72 M72 LAW
-20 %
Favorite
Firma4949A003/721:72

1:72 M72 LAW

The American M72 LAW single-use antitank launcher in 1:72 scale is a weapon accessory for figures and dioramas, not a kit.
In stock
4.36 €3.49 € You save 0.87 €
77propellerPRP0511:48

1:48 Bf 109G-6 WILDE SAU camuflage stencils Gerhard Pilz, 1./JG 300 for Eduard ki

Stencils for spraying the camouflage onto a Bf 109G-6 model in 1:48 scale, prepared for the Eduard kit. The mottled pattern comes out without improvising by hand.
In stock
31.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.