20% OFF Sale Until Wednesday! 

MASTER • KELIK • RESKIT • QUINTA STUDIO • EDUARD • GUNZE • VALLEJO • HGW • DEAD DESIGN • FIRMA49 • KOVOZÁVODY PROSTĚJOV • AZ MODEL • RS MODELS

 Sale Ends Wednesday, November 11, 2026!

1:48 F-4E with DMAS 3D-Printed & coloured Interior on decal paper (Meng)

1:48 F-4E with DMAS 3D-Printed & coloured Interior on decal paper (Meng)

32.36 €
Add to Cart

1:48 F-4E with DMAS 3D-Printed & coloured Interior on decal paper (Meng)

Color three-dimensional elements for the cockpit of the F-4E in the DMAS form, for the kit from the firm Meng, 1:48 scale. Made by 3D printing, they are applied with a brief soak.

Scale1:48
Manufacturer Quinta Studio
Product EAN5591111000009

Responsibility details are not available.

43.16 € 32.36 €
26.74 € without VAT
−25 % You save 10.80 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The F-4E is the two-seat version of the Phantom II combat aircraft, told apart from the older machines at first glance by the extended nose with a built-in gun. The pilot sits in front and the weapon systems officer behind him, and both cockpits are packed with instruments so densely that with the canopy slid back they make up the most striking part of a finished model. The DMAS designation in the name marks out the particular late form the set is cut for.

What the set contains

Color three-dimensional elements for the cockpit, made by 3D printing: instrument panels, side consoles, placards and belts. The elements are printed in color straight away, so there is no need to pick out the small dials and the lettering, which a brush reaches badly at this scale. They are printed on backing decal paper, off which they slide once soaked. The extent of the set and the position of the individual elements are given in the manufacturer's instructions; the set is intended for the F-4E kit from the firm Meng in 1:48 scale.

How the elements are applied

The elements of the QD line have no adhesive layer of their own. Cut the part from the sheet, soak it in lukewarm water for about fifteen seconds and slide it off the decal paper into place; do not use a decal softener or a decal fixer, as they would attack the printed resin. Clean and degrease the base beforehand and go over it with gloss varnish, on which the element will take hold; on broken surfaces a drop of super glue helps. On rounded surfaces press down gradually in small stretches, so that the film does not ripple. Blot the excess water away with a paper tissue and do not hurry, as once dry the element can rarely be moved.

Terms of supply

The kit, paints and glue are not part of the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

They do, but only briefly, about fifteen seconds in lukewarm water. The element then slides off the decal paper into place. Do not use a decal softener.

The F-4E kit in the DMAS version from the firm Meng in 1:48 scale. The manufacturer's instructions give the kit's part number.

No, they are printed in color straight away, including the lettering and the dials. Painting applies only to the surrounding plastic of the kit.

Press it down in small stretches from the center toward the edges with a soft tool. The film will take up the shape; just give it time and blot the excess water away first.

Last seen

1:48 F-4E with DMAS 3D-Printed & coloured Interior on decal paper (Meng)-25 %Stock ClearanceFavorite
Quinta StudioQD483711:48

1:48 F-4E with DMAS 3D-Printed & coloured Interior on decal paper (Meng)

Color three-dimensional elements for the cockpit of the F-4E in the DMAS form, for the kit from the firm Meng, 1:48 scale. Made by 3D printing, they are applied with a brief soak.
5 left
43.16 €32.36 € You save 10.80 €
1:32 F/A-18F late / EA-18G 3D-Printed & coloured Interior on decal paper (Trumpeter) (Small version)-25 %Stock ClearanceFavorite
Quinta StudioQDS321001:32

1:32 F/A-18F late / EA-18G 3D-Printed & coloured Interior on decal paper (Trumpeter) (Small version)

Interior decals in 1:32 scale for the late F/A-18F and the EA-18G, the small version of the set. They are applied over a gloss base and replace the flat parts of the kit. Intended for the Trumpeter kit.
3 leftof 5
30.76 €23.08 € You save 7.68 €
RT-DioramaRT358401:35

1:35 Printed Accessories: Wooden Floor Nr.5

1:35 Printed Accessories: Wooden Floor Nr.5 is a printed diorama accessory with a wooden floor pattern for scenes in 1:35 scale.
In stock
5.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.