The F/A-22A Raptor cockpit is a resin detail set in 1:48 scale from the Aires brand. It is an accessory for a kit, not a standalone model of the aircraft.
Responsibility details are not available.
The resin detail set F/A-22A Raptor cockpit in 1:48 scale from the Aires company. This is not an airplane model but a set for experienced modelers that replaces the cockpit from the base kit with a faithfully detailed resin cockpit tub with an instrument panel, side consoles and an ejection seat. The package is as a rule complemented by photo-etched parts with the belts and fine elements.
The Lockheed Martin F-22 Raptor is a single-seat twin-engine fifth-generation fighter designed for air superiority, with the emphasis on low observability (stealth) and supersonic flight without the afterburner (supercruise). The cockpit is marked by a modern digital glass cockpit with large displays, which the resin set transfers into scale.
Wash the mold release agent off the parts, separate them carefully from the casting blocks and bond with super glue (cyanoacrylate); protect your airways when sanding resin. Apply a primer, spray the paints with an airbrush in thin coats and pick out the displays and the instruments with varnish and detail decals according to the instructions. Before the fuselage is closed, check the fit with the particular kit.
This is a resin detail set, an accessory for a kit and not a standalone model. Glue, paints and the base kit are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
