1:48 Mi-4A Hound BASIC Kabuki Masks For Trumpeter

1:48 Mi-4A Hound BASIC Kabuki Masks For Trumpeter

5.56 €
Add to Cart

1:48 Mi-4A Hound BASIC Kabuki Masks For Trumpeter

A masking set for the Mi-4A Hound helicopter in 1:48 scale containing pre-cut masks made of kabuki paper tape in the basic BASIC coverage.

Scale1:48
Manufacturer New Ware
Product EAN8591111248648

Responsibility details are not available.

5.56 €
4.60 € without VAT
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Masking set 1:48 Mi-4A Hound, BASIC coverage

The set is a modeling accessory, not a model. It consists of pre-cut masks made of kabuki masking paper tape, traced exactly from the glazing of the Soviet Mi-4A helicopter in 1:48 scale. At New Ware the BASIC designation defines the extent of the sheet: it is the smallest of the levels offered, while the larger ADVANCED and EXPERT variants add further masked elements of the airframe. The masks are cut to fit the Mi-4A kit from Trumpeter.

Why a mask rather than tape cut by hand

The Mi-4 has a cockpit made up of many small panes with narrow frames, and a glazed station in the nose as well. Cutting such shapes out of self-adhesive tape with a scalpel means hours of work and one single slip, which is then the most visible thing on the finished model. A pre-cut mask fits the shape of the pane, holds the sharp edge of the frame, and removes the risk of scratching the clear part with the scalpel.

The real subject

The Mil Mi-4 was a Soviet piston-engined transport and utility helicopter of the 1950s, with the engine in the nose and a cargo hold with clamshell doors at the rear. In the West it received the reporting name Hound. The Mi-4A version was a transport and assault machine; it served with the Soviet armed forces and in a number of other countries as well as in civil operation, and became one of the most widespread helicopters of its generation.

How to fit the masks

First degrease the clear parts and let them dry completely. Lift the mask off the backing sheet with tweezers, seat it dry and only then press it down with a soft wooden stick, working from the center out to the edges. Cover the remaining areas of the cockpit with tape or masking fluid. Spray the interior color of the frames first, then the base coat and finally the outer camouflage. Remove the mask while the paint is merely dry, not after long curing.

Who the set is for

  • Helicopter builders who want clean frames with no touching up
  • Modelers spraying with an airbrush or from a can
  • Those who have avoided masking complicated glazing so far
  • Builders who save time on preparatory work

An accessory for a model. The model, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It defines the extent of the set. BASIC is the smallest of the levels offered; ADVANCED and EXPERT cover a larger number of masked elements.

It is not. This is purely a masking sheet; the model itself has to be obtained separately.

Of kabuki masking paper tape. It follows a slight curve well, holds a sharp edge and leaves no adhesive behind when removed.

Ideally shortly after the last coat has dried. Once the paint has cured for a long time, the edge may chip off instead of tearing away cleanly.

Last seen

New WareNWAM11051:48

1:48 Mi-4A Hound BASIC Kabuki Masks For Trumpeter

A masking set for the Mi-4A Hound helicopter in 1:48 scale containing pre-cut masks made of kabuki paper tape in the basic BASIC coverage.
In stock
5.56 €
ConstructoCO80190

Union Jack UK Flag 36x70mm

The Constructo flag of the United Kingdom 36 x 70 mm is a ready-made model flag for wooden ship models.
In stock
2.76 €
AiresAIR43481:48

1:48 A-10A Thunderbolt II cockpit set

A resin detail set of the cockpit for the A-10A Thunderbolt II in 1:48 scale from Aires . It is not an airplane model but an accessory that raises the fidelity of the cockpit interior of a kit.
In stock
16.80 €
WoodlandWA1864

Hampshire Pigs - HO Scale

Hampshire pigs for an HO layout. Adult animals as well as piglets in various postures, with one pig wallowing in a mud puddle of its own.
In stock
15.16 €
Aires/QuickboostQB489281:48

1:48 P-38F/G Lightning gun barrels - type A

Quickboost P-38F/G Lightning — gun barrels type A 1:48 is a resin detail set of the barrels of the machine guns and the cannon for models of the P-38 Lightning fighter.
In stock
4.76 €
Aires/QuickboostQB490321:48

1:48 OV-10D Bronco wing pylons

Resin underwing pylons for the OV-10D Bronco in 1:48 scale are a detailing accessory to a plastic kit. They will replace the simplified pylons from the kit with a finer casting.
In stock
6.36 €
EduardED3DL720671:72

1:72 F-35A Lightning II SPACE

The SPACE interior set for the F-35A Lightning II in 1:72 scale from Eduard joins colored 3D decals on carrier paper with photo-etched parts for a faithful cockpit.
In stock
11.80 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.