1:48 MiG-23BN late exhaust nozzle - opened

MiG-23BN late exhaust nozzle - opened is a resin detail accessory in 1:48 from the Czech manufacturer Aires. It replaces the simplified nozzle of a plastic model with an accurate copy of the late exhaust nozzle in the open position.

Scale1:48
Manufacturer Aires
Product EAN8591111645096

Responsibility details are not available.

20.80 €
17.19 € without VAT
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

MiG-23BN late exhaust nozzle - opened 1:48 (Aires)

This is a detail accessory of cast resin, not a kit of an aircraft. The content is a replacement engine exhaust nozzle for a model of the MiG-23BN in 1:48, made in the open position and in the late shape of the pattern. Aires is a Czech manufacturer of modeling accessories whose castings are marked by a fine surface and sharp edges to the nozzle petals, which is hard to achieve by injection molding.

The real subject

The MiG-23BN is the ground-attack and fighter-bomber version of the Soviet MiG-23 with a variable-geometry wing, intended for attacking ground targets. The engine nozzle with afterburner is made up of moving petals that change the cross-section according to the engine setting, and on a parked machine it is usually in the open position. The late pattern of the nozzle differs from the earlier one in the shape and division of the petals, which is why the manufacturer offers both variants separately.

Usage tips

First wash the casting in lukewarm water with detergent and remove any mold release agent, otherwise the paint will not hold. Cut the casting block off with a fine saw or a sharp knife and level the surface by sanding wet with your airways protected. Resin is glued exclusively with super glue, that is cyanoacrylate; plastic cement has no effect on it. Always dry-fit it into the fuselage of the model and if need be adjust the mating surface. For painting, metal shades with differing gloss work well: a lighter tone on the outer petals, a darker and flatter one inside, and at the end a fine sooty wash running from the outlet forward.

Who the accessory is for

  • Builders of MiG-23 models who need the late pattern of nozzle.
  • Modelers with experience of resin and super glue.
  • Competition models where the view into the nozzle is part of the judging.
  • Improving older kits with a simplified nozzle.

The accessory is supplied unassembled and unpainted. The base model, glue and paints are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. This is only a replacement exhaust nozzle in resin, and the base plastic model is obtained separately.

By the particular machine and the period of its service that you are building. The manufacturer offers the early and the late nozzle separately, because they differ in the shape of the petals.

With super glue, that is cyanoacrylate. Classic polystyrene cement will not join resin.

Reckon on cutting off the casting block, leveling the mating surface and dry-fitting. A little fitting to the fuselage is usual with accessories.

Last seen

AiresAIR47591:48

1:48 MiG-23BN late exhaust nozzle - opened

MiG-23BN late exhaust nozzle - opened is a resin detail accessory in 1:48 from the Czech manufacturer Aires. It replaces the simplified nozzle of a plastic model with an accurate copy of the late exhaust nozzle in the open position.
In stock
20.80 €
HGWHGW2339181:32

1:32 P-47D 58TH OVER NEW GUINEA

P-47D 58th over New Guinea is a set of wet transfers in 1:32 scale from HGW with markings of the machines of the 58th Fighter Group. It is not a kit, but markings for a finished model.
In stock
29.48 €
AiresAIR72791:72

1:72 F-100C/D Super Sabre wheel bays

F-100C/D Super Sabre landing gear bays are a resin detail accessory in 1:72 scale from the maker Aires for Trumpeter kits. They replace the landing gear bays with a faithful replica.
In stock
16.80 €
3DF3DF1048771:48

1:48 FOD covers for L-29 Delfin

3DF 1:48 FOD covers for L-29 Delfin are 3D-printed protective intake covers for a 1:48 scale model of the L-29 Delfin trainer aircraft. It is not an aircraft model, but an accessory for displaying the model in a parked state.
In stock
3.96 €
HäTHAT28019

28mm El Cid Andalusian Heavy Cavalry

28mm El Cid Andalusian Heavy Cavalry is a set of unpainted plastic figures of Andalusian heavy cavalry from the time of El Cid, in the 28 mm size intended for tabletop games and dioramas.
In stock
13.16 €
SX-ArtSXA720081:72

1:72 Paint mask Yak-130

SX-Art 1:72 Paint mask Yak-130 is a set of self-adhesive masking stencils for a model of the Yak-130 aircraft in 1:72 scale. It makes it possible to spray a motif in paint instead of sticking decals on.
In stock
3.56 €
EduardED6488531:48

1:48 F4F-4 gun bays PRINT

3D-printed gun bays for the Grumman F4F-4 Wildcat in 1:48 scale from Eduard let you build the model with the panels open and the inside of the wing fitted out.
In stock
15 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.