LAST CHANCE! 20% OFF Ends Tonight!

1:48 MiG-23MLD chaff/flare dispenser (empty)

1:48 MiG-23MLD chaff and flare dispenser (empty version) is a resin detail accessory from the Aires brand, not an aircraft kit. It replaces the simplified plastic part with an accurate casting with the chambers fully defined.

Scale1:48
Manufacturer Aires
Product EAN8591111692595

Responsibility details are not available.

10.80 € 8.64 €
7.14 € without VAT
−20 % You save 2.16 €
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

MiG-23MLD chaff and flare dispenser 1:48, Aires, empty version

This item is not a model of an airplane but a resin detail set intended to replace a part on an already built or part-built model of the MiG-23MLD fighter in 1:48 scale. A chaff and flare dispenser is a device that fires bundles of dipoles to jam radars and infrared flares to lead away heat-seeking missiles. The variant offered here captures the dispenser empty, that is with chambers without cartridges. The manufacturer, the Czech firm Aires, also lists a loaded variant and a variant with covered chambers in the same range, so you can choose according to the situation you want to capture on the model.

What the set offers

A resin casting holds crisper edges and deeper recesses than injection-molded plastic, which is limited by the shape of the mold. The mouths of the individual chambers therefore read as real openings, not as shallow dimples. The empty version makes sense on a model shown after takeoff or after a combat sortie, or on a machine in ground maintenance, when the device is clearly visible at close range.

Usage and painting tips

First wash the casting in lukewarm water with a drop of dish soap, because mold release residue clings to the surface and paint would not hold on it. Cut the casting block away with a razor saw or a knife with a fine blade; never snap it off. Resin is glued with cyanoacrylate, that is super glue, as ordinary plastic cement has no effect on it. Lay down a thin primer coat before painting, then bring out the chambers with a dark wash and the edges with a dry brush. When sanding resin, work wet and protect your airways.

Who the set is for

  • Modelers building the MiG-23 in 1:48 scale who object to the simplified plastic part
  • Anyone interested in detailed treatment of ground scenes and maintenance settings
  • Those who already have experience of cutting and gluing resin
  • Collectors building several versions of the same type side by side

This is an accessory for a build and is supplied unpainted. Glue, paints and the base model are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a resin detail accessory that replaces one part on a MiG-23MLD model in 1:48 scale. The model itself has to be obtained separately.

Cyanoacrylate-based super glue. Classic polystyrene cement does not attack resin and the joint will not hold.

The empty version has chambers without cartridges, that is the state after the decoys have been fired. The loaded version shows the chambers with cartridges, and the covered one the device closed with a cover.

Yes. Wash it in lukewarm soapy water, let it dry and lay down a thin primer coat. Without that the paint will not hold on the mold release residue.

Last seen

1:48 MiG-23MLD chaff/flare dispenser (empty)
-20 %
Favorite
AiresAIR47791:48

1:48 MiG-23MLD chaff/flare dispenser (empty)

1:48 MiG-23MLD chaff and flare dispenser (empty version) is a resin detail accessory from the Aires brand, not an aircraft kit. It replaces the simplified plastic part with an accurate casting with the chambers fully defined.
In stock
10.80 €8.64 € You save 2.16 €
1:72 L-159T mask
-20 %
Favorite
Kovozávody ProstějovKPEX0601:72

1:72 L-159T mask

Masking films in 1:72 scale shaped for the extended cabin of the two-seat L-159T version.
In stock
4.76 €3.81 € You save 0.95 €
Border ModelBD0072-2

Curved Tip Model Tweezers

Modeling tweezers with a curved tip. The curve lets you grip a small part at an angle and reach where straight tweezers cannot see.
In stock
9.56 €
TS-72 Clear Blue 100ml-25 %Stock ClearanceFavorite
TamiyaTA85072

TS-72 Clear Blue 100ml

Tamiya TS-72 Clear Blue is a synthetic lacquer spray in a clear blue shade, 100 ml. It is a transparent tinting lacquer with no covering power.
2 leftof 7
7.16 €5.36 € You save 1.80 €
ArmycastAC480071:48

1:48 Mi-2 SAR equipment

Armycast SAR equipment for the Mi-2 (1:48) is a resin detail set. It is not a model but an accessory for the search and rescue version of the light Mil Mi-2 helicopter.
In stock
11.96 €
Dead DesignNM720281:72

1:72 Avro Vulcan B.2 (2021 release)

1:72 Avro Vulcan B.2 is a masking set from the Dead Design brand for a model of the British delta-wing bomber in 1:72 scale. The release figure in the name refers to the particular edition of the kit the set is cut for.
In stock
7.96 €
ZvezdaZV80051:72

1:72 Greek Infantry

A set of unpainted plastic figures, Greek Infantry 1:72 from Zvezda. It depicts ancient Greek infantry of the 5th and 4th centuries BC.
In stock
10.76 €
PANZER ARTFI35-2191:35

1:35 Panzerknacker In Cammo Coverall Set

A set of German tank killers in camouflage coveralls, 1:35 from PANZER ART joins the theme of anti-tank infantry fighting into one item.
In stock
27.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.