1:48 MIRAGE III E/O/5/NESHER - RP 62 (1300 L) BELLY FUEL TANK

1:48 MIRAGE III E/O/5/NESHER - RP 62 (1300 L) BELLY FUEL TANK

13.16 €
Add to Cart

1:48 MIRAGE III E/O/5/NESHER - RP 62 (1300 L) BELLY FUEL TANK

A resin ventral drop tank RP 62 of 1300 liters in 1:48 scale for models of the Mirage III E, Mirage IIIO, Mirage 5 and Nesher. It is not an airplane kit, but an accessory for a finished kit.

Scale1:48
Manufacturer Armycast
Product EAN8591111616218

Responsibility details are not available.

13.16 €
10.88 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Ventral drop tank RP 62 (1300 l) 1:48 for the Mirage III and the Nesher

The Armycast resin set in 1:48 scale brings a ventral auxiliary fuel tank RP 62 of 1300 liters, of the kind carried by the Mirage III E, Mirage IIIO, Mirage 5 and the Israeli Nesher. This is not an airplane model, but an accessory that is fitted to a kit already built. A resin casting can manage sharper shapes and finer surface detail than injection-molded plastic allows, which is why it is used to replace the simplified external stores from a base kit.

The real subject

The delta-wing Mirage III and the Mirage 5 and Nesher versions derived from it had limited range without external stores, so drop tanks became a practically permanent part of their operating configuration. A large-volume tank carried under the fuselage extended endurance on transit flights and on patrols, and did so without taking up the underwing pylons. Machines rigged in exactly this way are the most common in period photographs, so a model without external stores looks unusually bare.

Building and painting tips

First wash the parts in lukewarm water with detergent, so no mold release agent is left on the surface; without that the paint will not hold. Cut the casting blocks off with a saw or a cutting disc, trim with a scalpel and level the surface with abrasive paper. Sand the resin wet and with respiratory protection. It is bonded with super glue (cyanoacrylate); where you need more time to set the part in position, a two-part epoxy works well. Apply a filler primer before painting, to unify the surface of the resin with the surrounding plastic. Paint the tank at the same time as the fuselage, so the shades match, and keep the weathering subdued, because external stores tended to be kept in good order.

Who the set is for

  • modelers building the Mirage III E, Mirage IIIO, Mirage 5 or Nesher in 1:48 scale
  • the build of a particular machine in its period operating configuration
  • completing an older kit with shape-simplified external stores
  • modelers with experience of gluing and sanding resin

This is an accessory set, not an airplane model. The base kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. The package contains a resin drop tank; the airplane kit itself has to be obtained separately.

Cyanoacrylate glue, that is, super glue. Ordinary plastic cement does not bite into resin and the joint would not hold.

Yes. Wash the parts in lukewarm water with detergent to remove mold release agent residue, cut the casting blocks off and apply a filler primer.

It is worked out for models of the Mirage III E/O, Mirage 5 and Nesher in 1:48 scale. With individual kits the fit may need slight adjustment.

Last seen

ArmycastAC480281:48

1:48 MIRAGE III E/O/5/NESHER - RP 62 (1300 L) BELLY FUEL TANK

A resin ventral drop tank RP 62 of 1300 liters in 1:48 scale for models of the Mirage III E, Mirage IIIO, Mirage 5 and Nesher. It is not an airplane kit, but an accessory for a finished kit.
In stock
13.16 €
OmaskOMK440091:48

1/48 Spitfire Mk.II kamuflážní pole M.Ferić kamo G (pro Eduard 11146)

A masking set in 1:48 scale for spraying the camouflage fields on a Spitfire Mk.II, in the pattern designated by the letter G. The name ties it to the Eduard 11146 kit.
In stock
7.16 €
HAD modelsHAD320741:32

1:32 Fiat CR-42 Hungarian Fighters with Cross insignias

HAD models 1:32 decals for Hungarian Fiat CR.42 fighters with cross insignia are a sheet of waterslide decals for a large model of this biplane.
In stock
11.96 €
Dead DesignNM320391:32

1:32 Spitfire Mk.I/II (1970s Release) - National Insignias A Type Roundels (Hasegawa)

Masks for spraying type A roundels on the Spitfire Mk.I and Mk.II in 1:32 scale. The set is cut for an older release of the Hasegawa kit and takes the place of the national insignia decals.
In stock
8.76 €
Plastruct PLT90547

Profil H (1 pcs) H-7,9mm W-7,9mm T-1,1mm L-375mm

The Plastruct H profile is an accurate H-shaped plastic beam measuring 7.9 x 7.9 mm and 375 mm long for modeling structures.
In stock
1.96 €
AoshimaAO062071:24

1:24 Savanna RE Amemiya FC3S RX-7 '89

The Savanna RE Amemiya FC3S RX-7 1989 is an injection-molded plastic kit in 1:24 scale from the Japanese manufacturer Aoshima. The subject is the Mazda Savanna RX-7 of the second generation as modified by a well-known Japanese specialist in rotary engines.
In stock
27.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.