Pre-cut self-adhesive painting masks Mirage III 1:48 from the Czech manufacturer Eduard. This is not a model — it is an accessory for painting the canopy glazing and the wheels cleanly.
Responsibility details are not available.
A set of precisely pre-cut self-adhesive painting masks from the Czech manufacturer Eduard for a model of the French Dassault Mirage III fighter in 1:48 scale. It is not a kit and it is not a model — it is an accessory that makes it easy to paint the canopy glazing and other small areas cleanly. This set is cut for one particular simplified edition of the model, so the layout of the masks matches that kit and the canopy framing gets sharp, straight edges without any laborious cutting of masking tape. Sets of this type usually also include circular masks for the wheel rims.
The Dassault Mirage III was a French supersonic fighter with its characteristic delta wing and no horizontal tail surfaces. It was very fast and became one of the most successful European fighters of the postwar era, serving with the air forces of many countries and proving itself in real combat. Its sharply cut glazed canopy is a rewarding subject for masking.
Lift each mask off the backing carefully with tweezers or the tip of a knife and lay it on a dry, degreased surface. Press the edges down firmly so that paint cannot bleed underneath. Apply the paint in thin coats, ideally with an airbrush, and pull the mask off before the coat hardens completely. On strongly curved shapes it helps to seal the edge with masking fluid.
This is a set of painting masks, not a model. The kit, paints and glue are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
