1:48 Seafire Mk.15 ‘FAA & RCN Service’

The Seafire Mk.15 in British and Canadian naval service is an injection-molded plastic kit in 1:48 scale from the Czech manufacturer Special Hobby. It captures the first carrier-borne Seafire powered by the Griffon engine.

Scale1:48
Manufacturer Special Hobby
Product EAN8591111363655

Responsibility details are not available.

26.36 €
21.79 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Seafire Mk.15 in 1:48 scale from Special Hobby

This injection-molded plastic kit in 1:48 scale is devoted to the carrier-borne Seafire fighter in the Mk.15 version, which you may also meet written as F Mk.XV. The box is focused on machines of the British Fleet Air Arm and of the Royal Canadian Navy. Special Hobby is a Czech manufacturer that has long devoted itself to less usual types and variants, so this is a subject not to be found in the ordinary range.

The real subject

The Seafire is the carrier-borne adaptation of the Spitfire fighter, with a tailhook, a strengthened structure and, on the later versions, folding wings as well. The Mk.15 version is a turning point: it was the first to leave the Merlin engine behind and receive the more powerful Griffon, which brought with it a longer nose, different cowling and a four-blade propeller. The change of powerplant raised the performance but at the same time worsened the behavior when landing on a deck, so on the following versions both the tail surfaces and the hook were revised. After the war the Seafire Mk.15 served not only with the British Fleet Air Arm but also with the Royal Canadian Navy.

Building and painting tips

Short-run kits call for more dry fitting than mainstream kits do, above all at the wing-to-fuselage joint and at the seating of the canopy. Finish and paint the interior before closing up the fuselage. Sand the engine cowling and the nose carefully, because the longer Griffon nose is the most conspicuous identifying feature of the model. Fit the transparent parts only after spraying and mask them. Spray the naval camouflage in thin coats and leave the transitions soft; lightening the center of the panels pays off so that the model does not look flat. Apply the decals over a gloss clear coat and add a decal softener.

Who the model is for

  • For collectors of British carrier-borne fighters in 1:48 scale
  • For anyone interested in the Spitfire and Seafire family and its developmental milestones
  • For modelers interested in postwar Canadian naval aircraft
  • For more experienced builders used to short-run kits

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Yes, these are two ways of writing the same designation, in Arabic and in Roman numerals. Both are commonly used in the literature.

In the Griffon engine and everything that goes with it, that is a longer nose, different cowling and a four-blade propeller.

Rather for a more advanced modeler. Short-run kits need more dry fitting and a little filling.

The contents of the package beyond what the name gives are not stated here.

Last seen

Special HobbySH482331:48

1:48 Seafire Mk.15 ‘FAA & RCN Service’

The Seafire Mk.15 in British and Canadian naval service is an injection-molded plastic kit in 1:48 scale from the Czech manufacturer Special Hobby. It captures the first carrier-borne Seafire powered by the Griffon engine.
In stock
26.36 €
UMUM3601:72

1:72 Wheel-track tank BT-5 with cylindrical turret

1:72 Wheel-track tank BT-5 with cylindrical turret is a plastic model kit of the Soviet BT-5 fast tank with a cylindrical turret from UM.
In stock
11.56 €
HasegawaHAJT891:48

1:48 N1K1-Ja Shiden / George Type 11 Koh

The N1K1-Ja Shiden George Type 11 Koh 1:48 from Hasegawa — an injection-molded plastic kit of the Japanese naval fighter from the end of the Second World War.
In stock
24.76 €
FLEX-I-FILEFF700

Rámové brousítko Flex-i-file - základní sada

The Flex-i-file frame sander in the basic set contains an aluminum frame and a set of abrasive strips. A tensioned strip follows the shaped surfaces of a model faithfully.
In stock
13.16 €
Hobby BossHB829561:72

1:72 German Pz.Kpfw. 38(t) Ausf.E/F

The Pz.Kpfw. 38(t) Ausf. E/F plastic kit in 1:72 scale from Hobby Boss. A German light tank of Czechoslovak design with thicker armor.
In stock
11.56 €
EduardEDD320201:32

1:32 de Havilland Mosquito FB Mk.II stencils

Eduard Mosquito FB Mk.II – stencil decals 1:32 is a waterslide decal sheet with factory and service markings for de Havilland Mosquito FB Mk.II models. It is not a kit but an accessory.
In stock
6.80 €
TechmodTECH481131:48

1:48 Focke-Wulf Fw 190F-8

The ground-attack Fw 190F-8 on a sheet of decals in 1:48, five machines of German and Hungarian service of the years 1944 and 1945.
In stock
7.16 €
Quinta StudioQD483301:48

1:48 F6F-3 Hellcat 3D-Printed & coloured Interior on decal paper (Eduard)

Quinta Studio 1:48 Grumman F6F-3 Hellcat, a color 3D interior decal , is a set of raised, pre-printed cockpit detail on decal paper for models of the F6F-3 Hellcat carrier fighter.
In stock
13.56 €
AberABR160991:35

1:35 WWII German pattern treadplate (Trumpeter Pz. IV)

Aber WWII German pattern treadplate (1:35) is a photo-etched metal set that faithfully replaces the non-skid treadplate on the fenders and platforms of German armored vehicles, the Pz.IV tank for example. The set is intended for the Trumpeter kit.
In stock
13.40 €
QuickwheelQW-2361:35

1:35 R.O.K. Army MBT K1 - Academy

1:35 K1 MBT of the South Korean army is a Quickwheel masking set for the road wheels, cut for the Academy kit.
In stock
7.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.