1:35 R.O.K. Army MBT K1 - Academy

1:35 K1 MBT of the South Korean army is a Quickwheel masking set for the road wheels, cut for the Academy kit.

Scale1:35
Manufacturer Quickwheel
Product EAN8591111000000

Responsibility details are not available.

7.56 €
6.25 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

1:35 K1 MBT of the South Korean army wheel masking set (Academy)

An accessory for painting the road wheels of the K1 main battle tank. It is not a kit or a replacement part, but a sheet of masks that covers the rim and leaves the rubber tire band exposed. The cut matches the wheels from the Academy kit. With this range the maker of the target kit is given in the name, because the shape and diameter of the wheels differ from model to model and a sheet from another set will not fit.

What makes the running gear of this subject special

The K1 has six rubber-tired road wheels on each side, but the way they are sprung is more interesting. The end stations use hydropneumatic units, the middle ones are on torsion bars. The vehicle can therefore change the attitude of its hull, kneel and lift its nose, which shows on a model in that the distance of the wheels from the hull need not be the same along its whole length. When you build the model in anything other than the neutral position, how much of a wheel actually peeps out from under the side plates changes too. The plates otherwise hide the upper run of the track, so the main attention belongs to the outer faces of the wheels and the lower circumference. Six wheels side by side also cannot be comfortably lined with a brush once the running gear is glued up.

What comes after unmasking

Take the mask off as soon as the paint is holding and let a dark wash run around the tire band. It settles the edge and draws out the shape of the disc and the heads of the bolts. Pigment dust follows on the underside of the hull, on the lower edge of the side plates and into the space behind them. Apply muddy cakes unevenly, mainly on the inner faces of the wheels and by the idler wheel, where dirt cakes on most. The running surface of the rubber tire band wears to a lighter tone, so light dry-brushing around the outer circumference will liven the wheel up better than another coat of covering paint.

Who the set is for

  • Builders of modern Asian tanks in 1:35 scale
  • For modelers who want twelve identical-looking tire bands
  • For builds where the running gear is to be dusty but the shades cleanly separated
  • For those who paint the wheels separately before seating them in the hull

Paints, glue and the kit itself are not included in the package. Check before ordering that your kit matches the one the set is cut for.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. These are masks for painting the wheels you already have in the kit.

The end stations have hydropneumatic suspension, so the vehicle can change the attitude of its hull. Depending on the position chosen, a differently sized part of the wheel peeps out from under the plates.

A base shade is enough. It is worth finishing the outer faces and the lower circumference in detail, as those are visible.

That is not stated here. The cut is prepared for the kit named and with a different molding the wheel dimensions may differ.

Last seen

QuickwheelQW-2361:35

1:35 R.O.K. Army MBT K1 - Academy

1:35 K1 MBT of the South Korean army is a Quickwheel masking set for the road wheels, cut for the Academy kit.
In stock
7.56 €
Red Fox StudioRFSQS-320561:32

1:32 Sukhoi Su-27 Flanker B (for Trumpeter kit)

An accessory set for a model of the Sukhoi Su-27 fighter in 1:32 scale, prepared according to the name for the Trumpeter kit.
In stock
26.76 €
EduardED64812071:48

1:48 Spitfire Mk.IXe - Undercarriage Legs (for Airfix Kits / 3D-Printed)

Eduard 1:48 Spitfire Mk.IXe – Undercarriage Legs are 3D-printed main landing gear legs with fine detail for a more faithful and sturdier installation.
In stock
9 €
TrumpeterTR072331:72

1:72 Russia KV-1 M1942 Lightweight Cast

Trumpeter 1:72 KV-1 M1942 with the lightweight cast turret is an injection-molded plastic kit of the Soviet heavy tank of 1942.
In stock
10.76 €
Black Dog modelBDF352591:35

1:35 Israeli soldier 2024 N°1

1:35 Israeli soldier 2024 N°1 is a resin figure of an Israeli soldier in present-day equipment, meant for modern dioramas in 1:35 scale.
In stock
14.36 €
1:35 JS-2m UZTM PRODUCTION TYPE, CHINESE VOLUNTEER-25 %Stock ClearanceFavorite
DragonDR68041:35

1:35 JS-2m UZTM PRODUCTION TYPE, CHINESE VOLUNTEER

Dragon 1:35 JS-2m UZTM Production Type, Chinese Volunteer is an injection-molded plastic kit of the Soviet heavy tank in Chinese service.
3 leftof 4
47.96 €35.96 € You save 12 €
1:48 FM-1 Wildcat/Martlet Mk.V. exhaust PRINT-25 %Stock ClearanceFavorite
EduardED64810151:48

1:48 FM-1 Wildcat/Martlet Mk.V. exhaust PRINT

Exhausts for the FM-1 Wildcat/Martlet Mk.V in 1:48 scale: an Eduard accessory carrying the PRINT designation, which refines the engine area of the license-built Wildcat.
Last one!of 4
4.40 €3.32 € You save 1.08 €
Aires/QuickboostQB723791:72

1:72 Sea Vixen FAW.1 correct nose

Quickboost Sea Vixen FAW.1 correct nose - a resin correct nose for the British de Havilland Sea Vixen FAW.1 carrier-based fighter in 1:72 scale. An aftermarket accessory, not a model.
In stock
6.36 €
OmaskOMK772521:72

1:72 T-6G Texan wheel bay plugs (for Academy/Wolfpack)

Omask 1:72 T-6G Texan — landing gear bay plugs (for the Academy / Wolfpack kits) is a set of shaped plugs of flexible foam that seal the landing gear bays while the model is being sprayed. It is not a kit but a masking accessory — you have to have the model itself.
In stock
3.20 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.