1:48 Track links for US bulldozer is a set of track links in 1:48 scale for a model of an American bulldozer. An accessory for the build of the running gear, not a kit.
Responsibility details are not available.
A set of track links in 1:48 scale meant for a model of an American tracked bulldozer. It is an accessory for a build, with which the running gear is filled out or replaced, not a kit or a finished model.
In 1:48 scale the track is short, but all the more visible on it are the quality of the pattern of the shoe and the sharpness of the edges. Separate links allow a track to be put together exactly along its run over the rollers and to hold the natural sag that one-piece vinyl tracks cannot manage. The set also serves when you want to stow spare links on a model or in a diorama as part of the machine's equipment. Compare the shape of the link with your model before building, therefore.
Cut the small parts off with a new blade and deal with any sanding with a fine file, as at a small scale every burr shows. Lay the links out dry on a strip of masking tape, check the length and only then glue them. Paint before fitting: a dark base, a metallic sheen with a drybrush on the edges of the shoes, then shades of rust and finally dust pigments. Apply mud only once the track is fitted, so that it carries over onto the chassis and the fenders.
This is an accessory for the build of a model, not a model on its own. The kit, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!