A model of the two-seat TT-1 Pinto jet trainer of the US Navy in 1:48 scale. An unusual type that will not be lost in a display case among ordinary fighters.
Responsibility details are not available.
The TT-1 Pinto came about at the end of the 1950s as an attempt to put graduates of flight school straight into a jet, with no propeller-driven intermediate step. It was a small two-seat machine with a single jet engine, a straight wing and nose landing gear; the crew sat in tandem. The US Navy bought only a small series to test the whole training concept, and when that was abandoned the machines passed into civilian hands. That is precisely why the Pinto is a rare guest in the modeling range.
The model is in 1:48 scale, that is in a size where the cockpit and the shaping of the nose already stand out and yet the finished aircraft fits on an ordinary shelf. A small aircraft in this scale will stand being looked at close up, so it pays to spend time on the cockpit and on the transition of the wing into the fuselage.
Before you start gluing, put the main parts together dry and look over the mating surfaces. Cut the excess material off with a sharp blade a little away from the part and sand the remainder. Wash and degrease the surface before painting. Finish the cockpit before you close the fuselage, because later you will no longer reach it. Trainers tend to wear pronounced finishes, so prepare masking for the transitions between shades and spray in thin coats. The recommended procedure and the paints are given in the manufacturer's instructions.
The model will please builders of American aviation subjects of the Cold War and collectors of less usual types. Paints, glue and other modeling supplies are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!