1:48 US 2 1/2 ton Cargo Truck accessories set for Tamiya 32548, 10 resin parts

1:48 US 2 1/2 ton Cargo Truck accessories set for Tamiya 32548, 10 resin parts

11.16 €
Add to Cart

1:48 US 2 1/2 ton Cargo Truck accessories set for Tamiya 32548, 10 resin parts

1:48 US 2 1/2 ton Cargo Truck accessories set is a resin set of ten parts for a model of the American two-and-a-half-ton cargo truck.

Scale1:48
Manufacturer Black Dog model
Product EAN5591111010004

Responsibility details are not available.

11.16 €
9.22 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Accessories for the American two-and-a-half-ton cargo truck 1:48

Ten resin castings complete a model of the American cargo truck of the two-and-a-half-ton class with 6x6 drive. The set adds stowage and equipment; the truck itself is not in it. It is cast by the Black Dog brand in 1:48 scale.

The real subject

The three-axle cargo truck with a payload of two and a half tons was the backbone of American logistics on every theater. It carried ammunition, fuel, engineer stores and soldiers, and its numbers ran into the hundreds of thousands. In service the cargo bed was usually filled right up to the side rails, because columns ran at full load and nobody could afford an empty bed in wartime. Tankers, workshop bodies and engineer versions were built on the same chassis.

Tips for working it

Lay the stowage out so that it stays visible even once the tarpaulin is closed, if you leave one on the truck. The lower layer only needs to be suggested, since usually only the upper pieces can be seen. Before gluing, free the castings of the thin film of flash that forms around the edges during casting. A final layer of dust on the wheels and on the bed links the load with the vehicle into one whole.

Who the set is for

  • Builders of supply columns and rear-area scenes
  • Modelers who build vehicles away from the firing line too
  • Those interested in American logistics of the Second World War
  • Those who complete vehicles with resin oddments

Count on the fact that neither paint products nor the carrying vehicle are in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. The package carries accessories only, which are added to a finished model of the vehicle.

The exact placement is not stated here; with cargo equipment the bed predominates.

Usually it is enough to remove the casting block and the thin flash around the edges; do not expect bigger work than that.

Last seen

Black Dog modelBDT480481:48

1:48 US 2 1/2 ton Cargo Truck accessories set for Tamiya 32548, 10 resin parts

1:48 US 2 1/2 ton Cargo Truck accessories set is a resin set of ten parts for a model of the American two-and-a-half-ton cargo truck.
In stock
11.16 €
ReskitRS32-04651:32

1:32 GBU-31 (V) 3/B Bombs U.S. Air Force (2pcs) (B-1B, F-35, F-22, F-111C) (3D Printed)

Reskit 1:32 GBU-31 (V) 3/B (2 pcs) are 3D printed resin guided bombs for models of American combat aircraft.
In stock
16.76 €
Planet modelsPLT2821:48

1:48 Shusui-shiki Kayaku Rocket ‘WWII Japanese ground-to-air ram missile’ 2 pcs

Shusui-shiki Kayaku Rocket : a resin kit of a pair of Japanese ramming rockets with transport trolleys in 1:48 scale from Planet Models.
In stock
45.16 €
ReskitRS72-04661:72

1:72 GBU-31 (V) 4/B Thermally Protected Bombs U.S. Navy (2pcs) (F/A-18E/F, F-35B) (3D Printed)

GBU-31 (V) 4/B Thermally Protected Bombs US Navy 1:72 is a set of two resin, 3D printed JDAM guided bombs in the thermally protected form from Reskit, for aircraft models in 1:72 scale.
In stock
7.96 €
ReskitRS48-04701:48

1:48 SUU-16A 20mm Gun Pod (Open Gun Bay) With Centerline Pylon For F-4 'Phantom II' (C, D) (1pc) (3D Printed)

SUU-16A 20mm Gun Pod (Open Gun Bay) with a centerline pylon 1:48 is a resin, 3D printed replica of the podded gun with the bay open, for models of the F-4 Phantom II (C, D) in 1:48 scale from Reskit.
In stock
16.76 €
Mark IDMK144341:144

1:144 Royal Hungarian Air Force Insignia 1942-45 (size: 800, 900, 1000, 1100, 1200 mm)

Mark I 1:144 Hungarian national insignia 1942–1945 is a sheet of wet decals with the national insignia of the Royal Hungarian Air Force in five sizes. Intended for aircraft models in 1:144 scale.
In stock
2.36 €
1:32 SUU-16A 20mm Gun Pod (Open Gun Bay) With Centerline Pylon For F-4 'Phantom II' (C, D) (1pc) (3D Printed)-25 %Stock ClearanceFavorite
ReskitRS32-04701:32

1:32 SUU-16A 20mm Gun Pod (Open Gun Bay) With Centerline Pylon For F-4 'Phantom II' (C, D) (1pc) (3D Printed)

The SUU-16A 20 mm gun pod with an exposed bay and a centerline pylon for the F-4 Phantom II (C, D) is a detail accessory in 1:32 scale from the Reskit brand. It is added to a model under construction; the aircraft is not in the package.
2 leftof 3
27.16 €20.36 € You save 6.80 €
1:32 F/A-18 Super Hornet/EA-18G Growler exhaust nozzles type 2 for Trumpeter kit-25 %Stock ClearanceFavorite
ReskitRSU32-02131:32

1:32 F/A-18 Super Hornet/EA-18G Growler exhaust nozzles type 2 for Trumpeter kit

Replacement engine exhaust nozzles for models of the F/A-18 Super Hornet and EA-18G Growler types in 1:32 scale, type 2 version. The set is intended for kits from Trumpeter.
2 leftof 4
32.76 €24.56 € You save 8.20 €
AberABR700L011:700

1:700 Set of 8pcs 380 mm long barrels for turrets without antiblast covers ships Richelieu,Jean Bart

A set of 8 turned 380 mm barrels from Aber in 1:700 in the long form for turrets without blast bags, intended for models of the ships Richelieu and Jean Bart.
In stock
4.40 €
Artwox ModelAM20003A1:700

1:700 USS Iowa BB-61 Wooden Deck w/Masking Sheet & Photoetch for Tamiya 31616 kit

A set for the model 1:700 USS Iowa BB-61 from Artwox Model contains, according to the name, a wooden deck, a masking sheet and photo-etched parts. It is an accessory to a kit, not a model. Intended for the Tamiya 31616 kit.
In stock
17.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.