A set of cut masking pieces of kabuki paper for a model of the MH-60L Black Hawk helicopter in 1:48 scale.
Responsibility details are not available.
The MH-60L is a variant of the Sikorsky UH-60 Black Hawk transport helicopter adapted for the special operations of the armed forces of the United States. It is told from an ordinary Black Hawk by its equipment for night flying and by other features on the fuselage. For a modeler the essential point is that the helicopter has glazing not only in the cockpit but also along the sides of the cargo compartment, so masking before spraying takes more time than on a fighter.
Pre-cut self-adhesive masks of kabuki paper for a model in 1:48 scale. Kabuki paper is thin, follows slightly convex surfaces well and on removal leaves no sticky film on the clear parts. The extent of the set, and which MH-60L kit the masks are cut for, is given in the manufacturer's data.
Stick the masks onto clean and degreased glazing before spraying, not after it. Take them with tweezers, lay them along the edge of the frame and press them down with a wooden stick so that no gap is left anywhere for paint to flow through. Spray the edges first in the interior shade and only then in the external finish; the transition at the mask will be cleaner. Take a mask off as soon as the paint has set; in a fully cured finish the edge tears. Wipe any adhesive residue off with alcohol on a cotton swab.
For a modeler who does not want to build the glazing of a Black Hawk up with tape strip by strip. The helicopter kit and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!