A resin set of engines and exhausts for the Grumman S-2F Tracker in 1:72 scale. It replaces the coarser plastic parts at the front of the engine nacelles.
Responsibility details are not available.
A resin set of engines and the exhaust system in 1:72 scale for the carrier-borne Grumman Tracker in the S-2F version. It replaces the coarser plastic components in the forward part of the engine nacelles and adds detail that is clearly visible on the finished model.
The Tracker came about in the 1950s as the first American carrier-borne machine to combine the search for submarines and their destruction in one airframe. It was powered by a pair of air-cooled Wright Cyclone radial engines of nine cylinders, housed in nacelles under the wing. The designation S-2F comes from the redesignation of American military equipment in 1962, when a unified system replaced the older factory codes. The aircraft then served in many countries for long decades more, and some examples fly to this day in a firefighting conversion.
First rid the castings of the release agent and try seating them in the nacelles dry, widening the opening if need be. The radial will stand out when you spray it dark and bring out the cylinders with a graphite sheen. The exhausts deserve a rusty cast and a fine trace of soot led along the airflow. Bond everything with super glue and work wet with the sanding dust.
The set serves as a complement to a kit, which it does not replace.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!