1:48 Boston MK.III part 1 - Workhorses in the sky

1:48 Boston MK.III part 1 - Workhorses in the sky

11.96 €
Add to Cart

1:48 Boston MK.III part 1 - Workhorses in the sky

The Boston Mk.III decal set, part 1 from the Workhorses in the sky series by Art Scale is intended for models in 1:48 scale. It is not an aircraft kit.

Scale1:48
Manufacturer Art Scale
Product EAN8591111248640

Responsibility details are not available.

11.96 €
9.88 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Boston Mk.III, part 1, decal set 1:48 (Art Scale)

This item is not an airplane model but a decal set for models of the twin-engine Boston Mk.III in 1:48 scale, issued in the series called Workhorses in the sky. The designation part 1 means that this is the first part of a series devoted to this type; a follow-up second part with a different selection of aircraft also exists. How many markings the sheet holds, which particular schemes it covers and whether a sheet of technical stencils is included is not stated here, so check the contents against the manufacturer's information.

The real subject

Douglas Boston was the British name for the American twin-engine aircraft of the A-20 Havoc family: a fast light bomber and attack machine with tricycle landing gear and a glazed nose for the navigator and the bombardier. The Mk.III was one of the most widely used British variants and served with other Allied operators as well. Its characteristic features are the narrow fuselage, the engine nacelles with radial engines and the relatively high-set pilot's cockpit. Because the type had so many operators, it also carries a wide palette of color schemes, which makes it a rewarding subject for decal sets.

Usage tips

Always apply decals over a smooth gloss surface: on a matte finish, silvering appears under the carrier film. Cut the decal as close to the artwork as possible, soak it in lukewarm water for only a few seconds and let it rest on a paper towel until it releases. Slide it into place with a brush and water, press the air out with a soft towel and let it dry thoroughly. Over engraved lines and uneven surfaces, a decal softener applied drop by drop helps; do not touch the decal while the softener is working. Once it is dry, clear coat it to the sheen you want so that the edges of the film disappear.

Who the set is for

  • Modelers who want a Boston Mk.III model in markings other than those in the box
  • Builders of Allied aircraft in 1:48 scale
  • Collectors of decal sets for a single type
  • Beginners and advanced modelers alike, since working with decals is undemanding

This is a decal set, not a kit. The aircraft model, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a decal set for a model you already own. The model itself is not included in the package.

The number of schemes is not stated here. We recommend checking the contents against the packaging and the enclosed instructions.

It is the first part of the series for this type. A follow-up second part with a different selection of aircraft also exists.

Onto a smooth gloss clear coat. On a matte surface, silvering forms under the carrier film.

Last seen

Art ScaleASKD480791:48

1:48 Boston MK.III part 1 - Workhorses in the sky

The Boston Mk.III decal set, part 1 from the Workhorses in the sky series by Art Scale is intended for models in 1:48 scale. It is not an aircraft kit.
In stock
11.96 €
Eureka XXLER-35721:35

1:35 Upgrade kit for the M728 Combat Engineer Vehicle (for AFV Club 35254 Kit)

An accessory set in 1:35 scale for a model of the American M728 Combat Engineer Vehicle, built for the AFV Club 35254 kit.
In stock
22.76 €
Mark IDMK72121:72

1:72 ROCAF/Republic Of China Air Force Roundels (2 sheets)

1:72 ROCAF/Republic Of China Air Force Roundels is a sheet of wet decals with the national insignia of the Republic of China Air Force.
In stock
4.76 €
Artillery modelsARTB9004

Kladka boční 7,5mm 3d print - 10 ks

Ten side blocks 7.5 millimeters in size, printed on a 3D printer. Intended for the rigging of sailing ship models.
In stock
1.96 €
Number FiveN5-C134

BRZ Pearl Blue

BRZ Pearl Blue is the pearl blue from the palette of the Subaru BRZ coupe, a brand that has had blue bound to it since its rally seasons.
In stock
5.96 €
RevellRE038211:32

1:32 AH-1G Cobra

Revell 1:32 AH-1G Cobra is a plastic kit of the legendary American attack helicopter of the Vietnam War era in a large, striking scale.
In stock
52.76 €
HAD modelsHAD482301:48

1:48 L-29 in Hungarian Service / Hungarian painting sheme

A decal sheet for a model of the L-29 trainer in Hungarian service, 1:48 scale. It brings the markings and the basis for a color scheme.
In stock
11.96 €
Hobby ZoneHZOM17

Cabinet Module

Cabinet Module is a cabinet part of the modular system of modeling organizers from Hobby Zone.
In stock
21.96 €
BANON DESIGNBAN509-15

BAN509 hex nut with bolt 1,5mm

A nut with a bolt 1.5 mm in size. Six flats return the light in regular steps, so the joint looks like metal tightened with a wrench.
In stock
10.36 €
Number FiveN5-X040

Gauloises Extreme Blue

Gauloises Extreme Blue is a blue matching the tone that the teams sponsored by the French Gauloises tobacco brand wore.
In stock
5.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.