Masks for the glazing and wheels of the Mi-24A Hind B helicopter in 1:48 scale deal with the cabin in both positions, the side windows of the fuselage and the wheel rims. In the package there are two sheets.
Responsibility details are not available.
The set contains two sheets of pre-cut masks in thin masking tape. It covers the cabin canopy in both positions, the glazing of the cargo compartment from the inside and the outside, and the wheel rims. The tape is semi-transparent, so you can see exactly where it is being laid, and after painting it can be taken off without adhesive residue. With careful removal it can be used on another model as well.
The Mi-24A is the early production form of the Soviet attack helicopter which was to join firepower with the ability to carry a group of soldiers. It is told apart from the later machines at first glance: the crew sits behind a common sizeable glazing, which is called the greenhouse, and not in cabins stepped one above the other. The cargo compartment has windows along its sides, which form a pronounced line on a model and give the most work during painting.
First rid the parts of grease and let them dry. Grip the mask with tweezers, lay it from the middle toward the edges and press the edge down with a toothpick, so that paint does not run under it. Spray in thin layers; a heavy layer creates a step at the edge. Remove while the paint has only flashed off, and that at a shallow angle.
It is an accessory for painting; the helicopter itself and the paints are not enclosed.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!