The Heinzmann fire extinguisher system in 1:24 scale allows up to four complete installations to be built, including the valve, the pressure gauges and the lettering.
Responsibility details are not available.
The set makes it possible to build up to four complete Heinzmann fire extinguisher installations of the kind fitted into racing cars. Besides the bottles themselves it contains the release valve, the control buttons and levers, pressure gauges and a decal sheet with several variants of lettering and plates. According to the maker the printed parts are ready for painting with no base coat, so that the fine relief is not lost.
A permanently built-in extinguishing system is part of the mandatory equipment in circuit and competition cars alike. The pressure bottle tends to be stowed in the passenger's space or behind the seat, the run of pipes leads to nozzles above the engine and in the cabin, and the crew sets it off with a lever within reach. The marshals moreover have an external pull handle by the windshield; it is precisely such small things that give a model its credibility.
Break the parts carefully out of the frame and sand the cuts down with fine paper. Spray the body of the bottle in a metal or a red shade according to the real subject, and then apply the lettering from the enclosed sheet onto a slightly glossy surface. Make the pipes of the run yourself from thin wire and fasten them with band clamps. Seat the finished installation into the interior before you close the body up.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!