The shell of the B-17G chin turret in 1:32 scale, printed in resin, completes the outer shape of the lower turret under the nose of the large bomber. The shell is shaped for the HK Models kit.
Responsibility details are not available.
A separately sold shell from the Hungarian brand SBS Model, printed in resin and delivered on print supports. Anyone building the nose interior from the matching conversion by the same maker needs exactly this outer part with it. It can also be used when the plastic original is damaged or inaccurate in shape. The attachment to the fuselage matches the nose of the HK Models kit.
The lower turret in the nose appeared on the Flying Fortresses so that the crew would stop being defenseless against a head-on rush by fighters. The gunner did not operate it from inside: he aimed from his position in the glazed tip and the turret with its two heavy machine guns was traversed remotely. The solution markedly raised the chance of the formations surviving a raid and became a recognition feature of the most numerous production version.
First remove the supports with a fine-toothed saw and level the area with wet sandpaper, so that no dust flies. Degrease the part before painting. Check the attachment to the fuselage dry and fill any play with a drop of thicker cyanoacrylate glue with an activator. The thin edges of the turret glazing will stand only careful sanding, otherwise they crack easily.
It is a single part, not a complete kit.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!