Seat belts for the pilot seats of the UH-60 helicopter for models in 1:35 scale, printed and ready to be applied.
Responsibility details are not available.
For helicopters 1:35 is the home scale, because figures and equipment shared with ground vehicles fit it. The cockpit of a Black Hawk model at this size offers room enough for the seat harnesses to show well, and at the same time the parts are not so large that they could be made of plastic without trouble. Printed belts are therefore a practical answer here: they come with the weave of the fabric, the buckles and the adjusting hardware already rendered.
The set is reckoned for the pilots' seats, that is for the front part of the cabin. Anyone building a machine with the doors open or with the canopy slid back gains a detail that draws the eye at once and still takes less work than cutting strips out of foil and painting them laboriously.
Compared with an aircraft, the interior of a helicopter has the disadvantage that it can be seen from several sides at once. Through the side windows, the doors and from the front through the large glazing, so an unfinished seat is hard to hide. A few printed belts can remove this weak point faster than any rebuild, and without touching parts you already have glued and sprayed.
It is good to have the seat finished and matte, and only then let the belts come up. The dipped part is laid on, straightened into position and left to flash off; the excess water is drawn away with the corner of a paper tissue. Once dry comes a thin layer of matte varnish and any fine shading, which gives the belt volume.
The subject is the American multipurpose helicopter that replaced older types from the end of the 1970s and spread all over the world. The package holds only the printed parts for 1:35 scale.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!