1:48 A-4E/F Skyhawk Air Intake FODs #B with Jet Exhaust Plug, AOE Cover for Hasegawa kit

1:48 A-4E/F Skyhawk Air Intake FODs #B with Jet Exhaust Plug, AOE Cover for Hasegawa kit

7.96 €
Add to Cart

1:48 A-4E/F Skyhawk Air Intake FODs #B with Jet Exhaust Plug, AOE Cover for Hasegawa kit

A set of plugs with which the intake and the outlet of the power unit of a parked Skyhawk are closed off and the sensor on the nose is covered. Scale 1:48, for the kit of the Hasegawa brand.

Scale1:48
Manufacturer Kopecky Scale Models
Product EAN3391111783599

Responsibility details are not available.

7.96 €
6.58 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Why everything gets covered on the deck of an aircraft carrier

More small things lie around on a cramped deck than anyone would expect: loose screws, pieces of wire, scraps of tape. A jet engine sucks them in within a moment and the repair costs more than a whole year of maintenance. That is why the crew fits conspicuous plugs to every parked machine, usually in a saturated red and with long streamers, so that nobody forgets about them before takeoff.

What the set offers

The package holds exactly such plugs cast for the light carrier-borne attack aircraft designated A-4 in the E and F versions. They cover the mouths of both side intakes, close off the exhaust pipe and protect the sensor at the tip. The scale is 1:48 and the shape corresponds to the kit of the Hasegawa brand.

A side benefit for the builder

The intake ducts in the kit are shallow and end in a blind wall that is clearly visible when seen from the side. A fitted plug hides this shortcoming elegantly, so the laborious building out of the duct from plastic strip and putty falls away.

The painting procedure and the final check

Paint the plugs separately from the airframe, otherwise the saturated red cannot be reliably kept apart from the gray skin. Glue them in place only right at the end, after the painting and after the decals have been applied. The finished part must not overhang the outline of the opening anywhere, and seen from the side it should be flush with the surrounding skin. If a narrow gap appears somewhere, do not fill it with putty: a plug on a real machine never seats perfectly and a shadow around the circumference looks believable instead. The opposite mistake is worse, that is a plug pressed in too deep, because that gives away at once that there is nothing behind it.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

So that nobody overlooks them. A conspicuous color and long streamers are meant to make sure they are taken off before takeoff.

Yes. A covered intake hides the shallow duct of the kit, so lengthening it and filling it falls away.

Only after the paint and the decals are finished. Paint the plugs away from the model and seat them only then.

The name states one maker explicitly. On another kit the cross section of the intake differs and the plug would seat only partly.

Last seen

Kopecky Scale ModelsKSM480311:48

1:48 A-4E/F Skyhawk Air Intake FODs #B with Jet Exhaust Plug, AOE Cover for Hasegawa kit

A set of plugs with which the intake and the outlet of the power unit of a parked Skyhawk are closed off and the sensor on the nose is covered. Scale 1:48, for the kit of the Hasegawa brand.
In stock
7.96 €
Kopecky Scale ModelsKSM480271:48

1:48 Mitsubishi AAM-3 Short-range air-to-air Missile (2pcs)

Two castings of the Japanese Mitsubishi AAM-3 short-range guided missile in 1:48 scale, meant for models of machines of the Japan Air Self-Defense Force.
In stock
7.96 €
Kopecky Scale ModelsKSM480301:48

1:48 A-4E/F Skyhawk Air Intake FODs #A with Jet Exhaust Plug, AOE Cover for Hasegawa kit

1:48 A-4E/F Skyhawk: intake covers with an exhaust plug and a cover (set A) is a resin detail set of protective covers for models of the A-4 Skyhawk light attack aircraft. It is not an aircraft model but an accessory.
In stock
7.96 €
HaulerHLR872221:87

1:87 German rocket V-2/A4

1:87 V-2 / A4 rocket is a kit of the German ballistic missile of the Second World War in the H0 railroad scale from the Czech maker Hauler.
In stock
27.16 €
AK interactiveRCS129

WWII US Army & USMC Camouflage Colors (8x 17ml)

A set of eight 17 ml paints with the camouflage shades of the US Army and the Marine Corps from the period of the Second World War.
In stock
22.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.