Artwox Model 1:700 IJN Nagato Fullhull is a self-adhesive wooden deck of thin veneer with the laying of the planks printed on it, intended for the full-hull version of a model of this Japanese battleship. The set is cut for the Fujimi 421513 kit.
Responsibility details are not available.
This item is an aftermarket accessory to a plastic kit, not a model. It holds a wooden veneer cut to the outline of the deck areas of a Japanese battleship in 1:700 scale, with the printed laying of the planks and a self-adhesive layer on the back. The designation Fullhull refers to the full-hull variant of the model. On models of this scale the deck forms the largest unbroken visible area, so swapping the plastic relief for real wood is a change everyone notices.
The Nagato belonged to the first generation of Japanese battleships armed with 410 mm guns. She entered service at the beginning of the 1920s and in the interwar period went through a modernization that changed her funnel, her superstructure and her propulsion system. A typical mark of the ships of this generation is the tall multi-level superstructure, which in modeling literature is commonly called a pagoda superstructure. In the Second World War the Nagato served as a heavy unit of the main fleet, and her appearance went on changing during the war as the anti-aircraft armament grew.
The sequence of work matters more with this kind of accessory than the gluing itself. First finish the hull, sand the parting lines, fill the seams and degrease the area with alcohol: veneer follows every unevenness. Glue the deck on only after the surrounding gray areas have been sprayed, or you will foul the wood with paint. Remove the backing film from the reverse gradually and lay the part from the longitudinal axis outward, so that no air is trapped under it. Around the barbettes, the funnel and the bases of the superstructures, trim the overlap with a new blade guided flat along the edge. You can influence the shade of the wood with a weak glaze, and a dark wash will bring the gaps to life. A final matte varnish seals the wood and matches the sheen to its surroundings. According to the manufacturer the accessory is cut for the Fujimi 421513 kit.
This is an accessory to a plastic kit, not a model in its own right. The kit, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!