1:700 IJN Yamato (For Tamiya 31113)

IJN Yamato wooden deck 1:700 is a self-adhesive veneer sheet with the laying of the deck planks printed on it. The set is cut for the Tamiya 31113 kit.

Scale1:700
Manufacturer Artwox Model
Product EAN8591111000000

Responsibility details are not available.

13.56 €
11.21 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Wooden deck for the battleship Yamato 1:700

This is an aftermarket accessory to a ship kit, not a model. A thin wooden veneer carries the printed laying of the planks and a self-adhesive layer on the back, so it is stuck directly onto the plastic deck of a hull that has been built. The set is cut for the Tamiya 31113 kit and is one of several variants for the same ship, which differ from one another precisely in the target kit, so it is a good idea to check the particular kit before ordering.

The real subject

The Yamato was a Japanese battleship completed at the beginning of the 1940s, the largest of her kind in terms of displacement and the caliber of her main armament. Her wide deck with long unbroken areas of wooden planking is one of the features that most determine the look of a model, which is why a veneer deck pays off on her more than on small vessels.

Gluing tips

With a large ship the principle is not to remove the backing film all at once. Uncover only a few centimeters at one end, lay the part on and only then, according to how it sits, uncover further and press it down gradually. Once the self-adhesive layer touches the plastic over its whole area, correction is usually no longer possible without damaging the veneer. Press the deck down with the flat of your finger or with a smooth wooden stick, never with a sharp tool that would damage the printed layer. Fill the remaining narrow strips by the superstructures from offcuts and even the transitions out with dark weathering. You can fix the finished deck with a thin coat of matte varnish.

Who the set is for

  • Builders of large battleships in 1:700.
  • Modelers who want the grain of wood without laboriously painting individual planks.
  • Those finishing a model for a display case who care about the look of the deck areas.
  • More experienced modelers who can cope with laying large parts precisely.

This is an accessory to a plastic kit, not a model. The kit, glue, paints and varnish are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Yes, it is stuck over the plastic deck of the model and replaces painted planking with real wooden veneer with printed grain.

The outline matches the Tamiya 31113 kit. The same ship is issued in 1:700 by several manufacturers and the shapes of the decks differ, so the target kit has to be kept to.

Practically not. So remove the backing film only in sections, settle the part at one end first and only then uncover and press it down gradually.

Fill the narrow leftover areas from veneer offcuts and even the transition out with dark weathering, which at the same time brings out the gaps between the planks.

Last seen

Artwox ModelAW200021:700

1:700 IJN Yamato (For Tamiya 31113)

IJN Yamato wooden deck 1:700 is a self-adhesive veneer sheet with the laying of the deck planks printed on it. The set is cut for the Tamiya 31113 kit.
In stock
13.56 €
ELEFANTELE353301:35

1:35 GMC CCKW radiator grille, pattern 1, for Hobby Boss kit

1:35 GMC CCKW — radiator grille, pattern 1 is a resin detail part from ELEFANT that replaces the front radiator grille of the truck with a more accurate casting.
In stock
3.16 €
Royal ModelRM2681:35

1:35 Tiger II Fenders (tamiya)

A brass replacement for the thick plastic parts over the tracks: 1:35 Tiger II Fenders (tamiya) belongs with a model of the German heavy tank called the King Tiger.
In stock
26.36 €
Colibri DecalsCD480131:48

1:48 Fw-190 A3 JG 51 part I

Fw 190 A-3, JG 51, part I is a decal sheet in 1:48 scale from the Colibri Decals brand with the markings of German Focke-Wulf fighter aircraft. It is an accessory for a model, not a kit.
In stock
7.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.