LAST CHANCE! 20% OFF Ends Tonight!
1:700 USS California BB-44 1941 Wooden Deck w/Paint Masks & PE (for Trumpeter kit 05783)

1:700 USS California BB-44 1941 Wooden Deck w/Paint Masks & PE (for Trumpeter kit 05783)

21.96 €
Add to Cart

1:700 USS California BB-44 1941 Wooden Deck w/Paint Masks & PE (for Trumpeter kit 05783)

Wooden deck with masks and photo-etched parts for USS California BB-44 as of 1941 in 1:700 scale is an aftermarket set that gives the plastic deck of the kit a real veneer with pre-printed planks.

Scale1:700
Manufacturer Artwox Model
Product EAN8591111000000

Responsibility details are not available.

21.96 €
18.15 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Deck, masks and photo-etch for USS California BB-44 in 1:700 scale

The set is an accessory for the plastic kit of the battleship USS California BB-44 as she was in 1941, not a model on its own. The name gives three components of the package: a self-adhesive wooden deck with pre-printed plank laying, covering masks for painting and photo-etched metal parts. The veneer goes straight onto the plastic deck and takes over its shape, including the openings for superstructures and turret bases.

Laying the veneer from the middle out

The commonest mistake is to start at an edge. The veneer then shifts and at the opposite end a fraction of a millimeter of deviation arises, which in 1:700 scale shows as crooked planks. Work from the middle, therefore: uncover only the middle part of the backing, line the part up against the longitudinal axis and the turret bases, and only then work toward the bow and the stern. Force the air out with a soft wooden stick in a continuous stroke, so that no bubble is caught.

Working around superstructures and trimming

Around superstructures, hatches and breakwaters, never pull the veneer by force. Where the openings are tight, it is better to ease the plastic edge gently with a file than the veneer. Trim the overhang with a fresh blade run along the edge of the plastic, and change the blade often. The bow with its marked curve is easier to manage if you work it lightly with a damp finger and let it take the shape, pressing it down only then. Fine-tune the shade with a weak stain and seal the surface with matte varnish.

Who the set is useful for

  • Builders who want a faithful wooden deck in a small scale
  • Modelers working with photo-etched parts and a sharp knife
  • Anyone after a complete deck improvement in one package

This is an accessory for a plastic kit, not a model. The kit, paints and glues are not included in the package. The set is cut for one particular kit, Trumpeter 05783; check the match before buying.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

From the middle of the deck. You uncover only the middle part of the backing, line the part up against the longitudinal axis and only then work toward the bow and the stern.

It is better to ease the plastic edge with a fine file. Stretching the veneer by force leads to cracking or to the planks shifting.

It does not. The planks are already printed. Use a weak stain only if you want to shift the shade, and always test it on an offcut.

It is not. The package holds accessories only. The plastic kit has to be bought separately.

Last seen

Artwox ModelBM20006A1:700

1:700 USS California BB-44 1941 Wooden Deck w/Paint Masks & PE (for Trumpeter kit 05783)

Wooden deck with masks and photo-etched parts for USS California BB-44 as of 1941 in 1:700 scale is an aftermarket set that gives the plastic deck of the kit a real veneer with pre-printed planks.
In stock
21.96 €
ELEFANTELE350441:35

1:35 REAR ARMOR FOR PZ. IV J CHASSIS AND DERIVATES WITH LATE IDLER WHEELS BASE, TAMIYA KITS

A resin rear hull armor plate for the Pz. IV version J chassis with a late idler wheel mount, 1:35 scale from the manufacturer ELEFANT. An accessory for the plastic kit.
In stock
7.96 €
IBG modelsIBG721061:72

1:72 Scammell Pioneer Tank Transporter with TRCU30 Trailer and Crusader Mk. I/II

Scammell Pioneer Tank Transporter with the TRCU30 trailer and a Crusader Mk. I/II tank is a plastic kit of a British tractor with a trailer and a tank in 1:72 scale from IBG.
In stock
29.96 €
AML DecalsAMLM330011:32

1:32 Bf 109 G-6, flown by Major Heinrich Ehrler, III./JG 5 June 1943

Painting masks for the Bf 109 G-6 in 1:32 scale from the Czech manufacturer AML — for spraying the camouflage of a particular aircraft, flown in June 1943 by Heinrich Ehrler of III./JG 5.
In stock
3.56 €
Quinta StudioQD+480581:48

1:48 Tornado F.3 3D-Printed & coloured Interior on decal paper (Revell) (with 3D-printed resin parts)

The colored 3D-printed interior for the Tornado F.3 in 1:48 scale from Quinta Studio is a three-dimensional print on decal paper, completed according to the maker with printed resin parts.
In stock
40.76 €
Artwox ModelAM20019A1:700

1:700 Japanese Battleship Ise Wooden Deck w/Masking Sheet & Photoetch for Hasegawa #49117

Artwox Model 1:700 a wooden deck with a mask and photo-etched parts for the battleship Ise is a combined package of accessories to the Hasegawa 49117 kit.
In stock
19.16 €
ReskitRSU32-02371:32

1:32 F-16 Fighting Falcon (F100-PW-220) open exhaust nozzle for Tamiya kit

The open exhaust nozzle of the F100-PW-220 engine for the F-16 Fighting Falcon in 1:32 scale is a resin detail set from Reskit.
In stock
27.56 €
ReskitRSU32-02101:32

1:32 F/A-18E/F/G Super Hornet exhaust nozzles (type 1) for Revell kit

A pair of exhaust nozzles in the first version for the carrier aircraft of the Super Hornet family and for the Growler. Resin castings for the Revell kit in 1:32 scale.
In stock
32.36 €
LifecolorLIFUA248

UA248 - Finnish WWII Army 4B O Venäläinen vihrea Russian Green

A modeling paint in a green shade from the Lifecolor line devoted to the Finnish army of the Second World War. The Finnish name means Russian green; the shade is listed under the designation 4BO.
In stock
2.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.