1:700 USS Essex CV-9 (For Dragon 7049)

A veneer deck 1:700 for the American aircraft carrier USS Essex CV-9 from Artwox Model is an accessory to a plastic kit. The set is cut for the Dragon 7049 kit and replaces the plastic flight deck with real wood.

Scale1:700
Manufacturer Artwox Model
Product EAN8591111000000

Responsibility details are not available.

19.16 €
15.83 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Wooden flight deck 1:700 for the aircraft carrier USS Essex CV-9

This set from Artwox Model is not a model but an aftermarket accessory to a plastic kit of the aircraft carrier USS Essex CV-9 in 1:700 scale. The set is cut for the Dragon 7049 kit. That figure is worth watching, because versions for other kits of the same ship exist as well and the name of the vessel alone does not tell which variant is needed. The contents are a thin wooden veneer with the laying of the planks printed on it and with a self-adhesive back.

The real subject

The USS Essex CV-9 was the first unit of the class of the same name of aircraft carriers of the US Navy. It was a type that became the backbone of the American carriers of the Second World War, with a wood-covered flight deck, an island superstructure on the starboard side and elevators for moving aircraft between the decks. It is precisely the wooden flight deck that is the most demanding area for a modeler, because it takes up almost the whole upper silhouette.

Gluing and painting tips

The flight deck is one enormous area, so check the seating around the elevators and at the island dry before you reach for the film. Take the film off in strips across the deck and press the veneer down gradually with a soft cloth, so that no air stays under it. If the kit allows for marking the flight deck lines, deal with them only on the laid veneer and always in a thin coat, as a heavy one would cover the pattern of the wood. On a wartime flight deck a slightly uneven shade looks good; you will reach it with a very thinned wash applied section by section. Seal it with matte varnish in light passes.

Who the set is for

  • For builders of this aircraft carrier in 1:700 scale
  • For modelers for whom the plastic grid on the flight deck is not enough
  • For display case models whose upper area is the most visible
  • For those who want a big visual step without working with metal

This is an accessory to a plastic kit, not a model of the ship. The kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is cut for the Dragon 7049 kit. Versions for other models of the same ship exist as well, so check the variant.

No. This is a wooden flight deck, that is an accessory to a plastic kit in 1:700 scale.

Take the film off in strips across the deck and press the veneer down as you go with a soft cloth from the center toward the edges.

Yes, but only after gluing and in thin coats. A heavy coat of paint will cover the pattern of the wood.

Last seen

Artwox ModelAW201151:700

1:700 USS Essex CV-9 (For Dragon 7049)

A veneer deck 1:700 for the American aircraft carrier USS Essex CV-9 from Artwox Model is an accessory to a plastic kit. The set is cut for the Dragon 7049 kit and replaces the plastic flight deck with real wood.
In stock
19.16 €
Kits-WorldKW3D14810711:48

1:48 Blackburn Buccaneer S.2C/D 3D cockpit decal (for Airfix 12012 kit)

Complete full-color equipment for the cockpit of the Royal Navy carrier-based strike machine, derived from the cockpit of the Airfix kit.
In stock
18.76 €
MAC DistributionMAC720651:72

1:72 German 3t Vehicle with Wood Gas Generator

An injection-molded plastic kit of the German 3t truck with a wood gas generator in 1:72 scale from MAC Distribution: an Opel Blitz truck converted to run on wood gas.
In stock
11.56 €
DP CasperDPC720571:72

1:72 Czechoslovak Peoples Army Migs against Thunders 1953-1957

DP Casper CSLA MiGs against Thunders 1953-1957 in 1:72 is a decal set with markings for Czechoslovak MiGs and American aircraft of the early Cold War. It is not a model but a set of decals.
In stock
13.16 €
QuickwheelQW-0941:35

1:35 Sd.Kfz. 164 NASHORN - AFV CLUB

The 1:35 Sd.Kfz. 164 Nashorn wheel masking set marks out the border between the rubber tire band and the rim of the road wheels. The cutouts are cut for the kit from AFV Club.
In stock
10.36 €
Quinta StudioQD484791:48

1:48 F-35A 3D-Printed & coloured Interior on decal paper (Kitty Hawk/Zimi Model)

A 3D-printed colored interior for the F-35A in 1:48 scale on decal paper from Quinta Studio. The set is applied like a decal rather than glued on like a part, and it is cut for the Kitty Hawk / Zimi Model kit.
In stock
10.76 €
Special HobbySH481311:48

1:48 Fairey Firefly F/FR Mk.I

Fairey Firefly F/FR Mk.I is a plastic kit of the British carrier fighter and reconnaissance aircraft of the Second World War in 1:48 scale from the Czech maker Special Hobby.
In stock
31.96 €
1:144 English Electric Canberra T.17-25 %Stock ClearanceFavorite
AmodelAMOD14301:144

1:144 English Electric Canberra T.17

1:144 English Electric Canberra T.17 is an injection-molded plastic kit of the British training and special-purpose configuration of the Canberra jet aircraft, from Amodel.
Last one!of 3
12.76 €9.56 € You save 3.20 €
Green Stuff WorldGSW88241:48

DakkaDakka - Pandemonium - Nurgle Shoulder Pads Set 01 1:48

A set of pauldrons from the Pandemonium series of the DakkaDakka modeling range, 1:48 scale. Accessory parts for figures, for replacing the original shoulder covers.
In stock
4.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.