MASTER 1:72 Type 95 Ha-Go, 3D printed tracks is a set of replacement tracks for a model of the Japanese Type 95 light tank in 1:72 scale. It is not a kit but an accessory to the IBG kit.
Responsibility details are not available.
A set of replacement tracks for a model of the Japanese Type 95 Ha-Go light tank from the IBG kit in 1:72 scale, made by 3D printing technology. It is not a kit of the tank but an accessory, and you buy the model itself separately. In small scales the tracks are among the parts where the difference between plastic and a printed replacement shows best: injection-molded plastic has a limited depth of detail and draft angles, whereas printing manages the sharp edges of the guide teeth and the profile of the tread.
What that means in practice
On a model in 1:72 scale the tracks take up a large part of the silhouette from below and from the side, and seen from close up they determine the impression of the whole vehicle. A sharper profile also responds better to a dry brush and to pigments, so the resulting dusting and wear look more natural.
The Type 95 Ha-Go was a Japanese light tank of the 1930s. It was powered by an air-cooled diesel engine, which in tank production of the day was an unusual solution, suited to deployment in remote areas without developed supply. The main armament consisted of a small-caliber gun in the turret, completed by machine gun armament. The structure was light and mobile, but the armor matched the time of its origin and against later anti-tank means it was insufficient.
First carefully rid the printed parts of their print supports: nip them off as close to the part as possible and level the remainder with a sharp scalpel or a very fine file, not with coarse sanding paper. Before painting, wash the parts in lukewarm water with a drop of detergent and let them dry thoroughly. It is bonded with super glue; a cement for plastic has no effect on the printed material. The material tends to be more brittle than plastic, so fit the tracks without bending them and do not pull them over the wheels by force. They are painted over a primer, otherwise the paint holds badly on the smooth printed surface. Apply pigments and a wash only once the base color has dried.
This is a supplementary set, not a model. The kit, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!