Masks 1:32 AH-1G Cobra Late for both sides cover the frames of the late machine from the outside and from the inside.
Responsibility details are not available.
An extended variant for the late production AH-1G in 1:32 scale that allows for the inner face of the glazing as well. On a helicopter with such a large area of glass the inner framing is visible from every angle. The difference against single-sided masking shows above all on an open machine.
The glazing of the Cobra takes up almost the whole nose and separates two seats one above the other. Through it you see the gunsight, the controls and the seats, so any unfinished work inside has nowhere to hide. That is exactly why in large scales it pays to give the frames the same care on both sides as the surface of the fuselage. It is also visible from here where the clear area ends and the solid structure begins.
Split the painting into two phases. In the first spray the inner frames in the shade of the crew compartment and let them mature overnight. In the second add the outer masking and the camouflage finish. Between the phases look the part over against the light, as a mistake is much easier to put right before the next coat than after it. Lay the inner coat on thinly; a heavy coat reduces the transparency of the glass and the model then looks fogged.
Choose the inner shade according to references for the machine you are building; it differed across the production series.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!