Dead Design 1:72 Phantom FG.1/FGR.2 is a set of masks for the British national insignia and the technical lettering. The markings are sprayed straight onto the model, without the carrier film of a decal.
Responsibility details are not available.
A Dead Design set for models of the British Phantoms in the FG.1 and FGR.2 versions in 1:72 scale. It contains templates for the national insignia and the technical lettering, that is, a different kind of mask from the sets for glazing.
A decal carries the color on a transparent film, which forms an extra thin layer on the surface of a model. On a flat finish it shows as a glossy outline, and when badly settled air stays under it, which leads to silvering. A template leaves this intermediate step out: the paint is applied straight onto the surface, the insignia has no carrier film at all, and during further clear coating and weathering it behaves just like the finish around it.
British circular insignia are multicolored, so they are sprayed in layers and each one has its own mask. The most important thing is the register, that is, the exact settling of the next mask onto a layer already sprayed. Apply the paint thinly, otherwise a step arises at the edges against which the next mask rests and the register shifts. Between the layers let it dry thoroughly. The technical lettering is small and is often sprayed last, onto a base already closed with gloss or semi-gloss. With small lettering a test on an offcut of plastic proves worthwhile first, to verify the thinning of the paint: too thin and it runs under, too thick and it leaves a grainy edge.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!