SALE CONTINUES! Up to 70% off plastic model kits. Limited stock remaining on selected items! here

1:72 Radiators for PZL 37 Los B/B bis (IBG)

1:72 Radiators for PZL 37 Los B/B bis is a resin set of radiators for a model of the Polish PZL 37 Los bomber in the B and B bis versions in 1:72 scale from IBG models.

Scale1:72
Manufacturer IBG models
Product EAN85911119593141

Responsibility details are not available.

5.56 €
4.60 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Radiators for the PZL 37 Los B and B bis in 1:72 scale

This item is not a model of an aircraft but an accessory for the build. It brings the powerplant radiators of the Polish PZL 37 Los bomber in the form for the B and B bis versions. The B version made up the later and more numerous series, and because it differed in its powerplants, the shape of the cooling features differs too; there is therefore a separate set for the older A and A bis versions. The scale is 1:72 and the maker is the Polish brand IBG models.

The real subject

The PZL 37 Los counted in its day as one of the most successful European bombers of the medium category. The twin-engined all-metal low-wing monoplane had a remarkably clean surface by the standards of the time, the twin wheels on the main landing gear stood up to operating from unpaved surfaces, and its bomb load worked out better than that of a number of larger rivals. The later B version received a more powerful form of the Bristol Pegasus radial engines and twin vertical tail surfaces. In September 1939 the Polish Air Force committed only a fraction of the machines ordered; some of the aircraft were later evacuated to Romania.

Usage and painting tips

Wash the castings in lukewarm water with detergent, so that no mold release agent is left on them; without that neither paint nor glue will hold. Cut the casting blocks off with a saw or a sharp knife and level the surface by wet sanding. They are bonded with super glue, that is cyanoacrylate. Dry-fit the parts first. The radiators are painted at the same time as the engine nacelle, so it is advisable to fit them before the camouflage is sprayed. Darken the inside of the openings, so that a look into the radiator does not end on a solid wall, and pick the edges out carefully with a dry brush.

Who the set is for

  • Modelers building the Polish Air Force of 1939 in 1:72 scale
  • Builders who care about the correct shape of the engine nacelles
  • More experienced hands used to working with resin
  • Anyone interested in less usual types of interwar design

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is an add-on set of radiators for a model of the PZL 37 Los in 1:72 scale. The kit itself, glue and paints are not included in the package.

It is not meant for them. The older versions differed in their powerplants, and there is therefore a separate set of radiators for them.

Best of all before the camouflage is sprayed, because they are painted together with the engine nacelle. It is advisable to darken the inside of the cooling openings beforehand.

Super glue based on cyanoacrylate, or two-part epoxy. Ordinary cement for plastic models does not dissolve resin.

Last seen

IBG modelsIBG72U0281:72

1:72 Radiators for PZL 37 Los B/B bis (IBG)

1:72 Radiators for PZL 37 Los B/B bis is a resin set of radiators for a model of the Polish PZL 37 Los bomber in the B and B bis versions in 1:72 scale from IBG models.
In stock
5.56 €
Young MiniaturesYMYM18081:10

1:10 U.S. TANK CREW Europe WWII

Young Miniatures 1:10 U.S. Tank Crew Europe WWII is a resin portrait bust of a US tanker. The main work lies in painting the face, the leather and the tank helmet.
In stock
47.56 €
Art ScaleASKM320281:32

1:32 Mosquito FB Mk.VI double-sided express masks for Tamiya

Mosquito FB Mk.VI - double-sided express masks 1:32 is a set of precisely cut Art Scale stencils for spraying the outer and inner framing of the glazing of the British wooden fighter-bomber. The stencils are cut for the Tamiya kit.
In stock
11.96 €
LifecolorLIFUA572

UA572 - Air Grey FS16473 Satin

Air Grey FS16473 Satin is a water-thinnable LifeColor acrylic paint in a satin aircraft gray shade per the American standard FS16473.
In stock
2.76 €
1:24 P-47D Thunder Bolt Wheel set 2 (for Kinetic 1/24)-25 %Stock ClearanceFavorite
DEF ModelDS240021:24

1:24 P-47D Thunder Bolt Wheel set 2 (for Kinetic 1/24)

The DEF Model P-47D Thunderbolt Wheel set 2 in 1:24 is a resin set of detailed wheels for the American P-47D Thunderbolt fighter, the set 2 version. Intended for the Kinetic kit.
Last one!
16.36 €12.28 € You save 4.08 €
GasPatch modelsGP19-721811:72

1:72 Darne Lewis MKI Full Heat Sinks (2 Items)

An accessory set of two aircraft machine guns in 1:72 scale in the form with a full cooling jacket on the barrel.
In stock
5.96 €
AML DecalsAMLM490021:48

1:48 Lavochkin La-5F/FN /ZVD

AML painting masks 1:48 Lavochkin La-5F/FN for spraying the camouflage scheme of this Soviet fighter accurately with an airbrush.
In stock
3.56 €
CMKQ322921:32

1:32 YAK-3 – Exhausts for Special Hobby kit

The CMK 1:32 Yak-3 exhaust set is a resin detail accessory for experienced modelers that replaces the plastic exhausts of models of the Soviet Yakovlev Yak-3 fighter. The set replaces the exhausts of the Special Hobby kit.
In stock
5.56 €
AK interactiveAK11872

US ARMY HELO DRAB FS 34031 – AIR

US Army Helo Drab FS 34031 – AIR is a water-thinnable acrylic paint of 17 ml for an airbrush. It reproduces the matte green-gray finish of modern US Army helicopters.
In stock
2.76 €
Plastruct PLT90724

Rectengular Strip (1 pcs) H 0.5, W 2.0, L 250mm

Styrene rectangular strip 0.5 x 2.0 mm, 250 mm is a flat polystyrene profile from the brand Plastruct. It serves as material for scratch-building and for detailing models.
In stock
0.64 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.