Replacement ejection seats for the cockpit of the bomber Rockwell B-1B Lancer in 1:72 scale, prepared for the Airfix, Monogram and Revell kits.
Responsibility details are not available.
The Rockwell B-1B Lancer is an American strategic bomber with a variable-geometry wing and a crew of four. The cockpit has glazing drawn out to the sides, so the shape of the seats shows on a finished model when seen from above and their simplification is easy to spot.
Replacement ejection seats for the cockpit of the B-1B in 1:72 scale. The set is designed for the kits of the firms Airfix, Monogram and Revell, so the shape of the mating surfaces answers to their cockpit tubs and you do not have to rebuild the cockpit from the ground up.
The parts are not polystyrene; they are glued with cyanoacrylate glue or epoxy. Cut the excess material away with a sharp blade a little clear of the part and sand the remainder so that the seat sits level. Wash and degrease the parts before painting, otherwise the coat will hold poorly. Spray the base shade of the cockpit first, then tell the padding and the harness straps apart with a brush, and finally use a dark wash. Try the seats in dry before you glue the cockpit tub into the fuselage, because after that they cannot be moved.
For modelers who build the B-1B in 1:72 scale and want more accurate seats in the cabin than those from the kit. The kit, paints and glue are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!