Tellermine 42 1:72 is a small resin, 3D-printed set of German antitank mines. It is a detail accessory for dioramas at a small scale, not a kit of a vehicle.
Responsibility details are not available.
This set from Firma49 reduces the German Tellermine 42 antitank mine to the small 1:72 scale. It is a resin accessory made by SLA 3D printing with which you can bring engineer scenes and minefields to life at a small scale. It is not a vehicle kit but a detail accessory.
The Tellermine 42 was a standard German plate-type antitank mine of the Second World War. Its round body with a pressure fuze held a strong charge for knocking out the running gear of tanks. Mines of this type formed the backbone of German antitank obstacles on both main fronts.
In 1:72 scale the parts are very tiny, so work with tweezers and in good light. Wash the print resin residue off them, separate them from the print supports and bond them with cyanoacrylate glue. Dipping them in hot water makes any work easier. Apply a thin primer and then paint with ordinary colors; washes and pigments will add the patina.
The accessory is supplied unassembled and unpainted. Glue, paints and the base model are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
