1:72Kopie z Wooden wheels ver. 1

Wooden wheels in 1:72 scale as an accessory for dioramas and display scenes, in the version designated in the name as version 1.

Scale1:72
Manufacturer Firma49
Product EAN8591111037518

Responsibility details are not available.

5.16 €
4.26 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

What the accessory represents

A wooden wheel with spokes and a fitted iron tire gives a scene a period and a setting. Leaning against the wall of a building, lying in a ditch by a road or propped against a cart, it shows that the scene is not taking place on an empty board. In 1:72 scale the wheel is small, which makes its shape matter all the more: the viewer recognizes it even when it is barely the size of a fingernail. The version 1 designation distinguishes the variant within the range; how many pieces the set holds and what dimensions they have is stated by the manufacturer.

Working the parts

Follow the manufacturer's instructions for the material of the parts and the recommended glue. Cut off the excess material and production marks with a sharp blade a little away from the part and carefully sand the rest with fine paper so that you do not round off the edges of the spokes. A small part breaks easily in the fingers, so work with tweezers and in small steps. Try the seating surfaces dry and only then glue. Wash the parts before painting and let them dry completely, as a finish will not hold on an uncleaned surface.

Painting and setting it in a scene

Wood looks convincing when it is not painted in a single color: lay down a lighter base, darken it with a glaze and finally lift the edges with a dry brush. Treat the tire and the ironwork as metal, that is a dark base and a hint of rust where water would run down after rain. A wheel that stands on a soft surface in the scene should be sunk lightly into the terrain; lying flat on a smooth board it looks as though it were floating. Apply dust and mud from the bottom upwards and let them fade out toward the top.

Terms of supply

The base, a model, figures, paints and glue are not included, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

1:72 scale, that is vehicles, buildings and figures of this size.

Follow the manufacturer's instructions and choose the glue and the surface preparation accordingly.

It is not. The accessory is supplied on its own; the base and the other elements of the scene have to be obtained separately, unless stated otherwise.

Sink it lightly into the terrain so that it really touches the ground, and apply the dirt from the bottom upwards, fading out gradually.

Last seen

Firma4949C075/721:72

1:72Kopie z Wooden wheels ver. 1

Wooden wheels in 1:72 scale as an accessory for dioramas and display scenes, in the version designated in the name as version 1.
In stock
5.16 €
MASTERAM1440011:144

1:144 Supermarine Spitfire Vb - Hispano 20mm cannons in fairings

Turned metal barrels for Hispano 20 mm cannons in fairings for a model of the Supermarine Spitfire Vb in 1:144 scale. An accurate replacement for the plastic parts of the kit.
In stock
3.20 €
EduardED6722371:72

1:72 R-3R missiles for Mikoyan MiG-21

R-3R guided missiles for the MiG-21 1:72 (Eduard Brassin) is a resin set of guided air-to-air missiles for faithful armament on MiG-21 models.
In stock
6.80 €
ZebranomodelZE1000751:100

1:100 Renault AMR35 ZT4 w. FT turret

Zebrano Renault AMR35 ZT4 with the FT turret is a resin kit of the French reconnaissance vehicle in 1:100 scale, intended for experienced modelers.
In stock
7.96 €
1:32 Mirage 2000C, 2000-5 (TAIWAN) pilot sitting in ejection seat MB Mk.10Q (Type 1)-25 %Stock ClearanceFavorite
ReskitRSF32-00111:32

1:32 Mirage 2000C, 2000-5 (TAIWAN) pilot sitting in ejection seat MB Mk.10Q (Type 1)

1:32 Mirage 2000C, 2000-5 (TAIWAN) pilot sitting in ejection seat MB Mk.10Q (Type 1) from Reskit is a figure accessory in 1:32 scale with a pilot of the Republic of China Air Force (ROCAF) in a seated pose for an ejection seat.
6 left
17.16 €12.88 € You save 4.28 €
Special HobbySH725331:72

1:72 A-20G Havoc ‘Over Europe and Pacific’

The injection-molded plastic kit Douglas A-20G Havoc Over Europe and Pacific in 1:72 scale from Special Hobby - the American attack aircraft with decals for the European and the Pacific theaters.
In stock
26.36 €
EduardED4915931:48

1:48 Boeing AH-6J Little Bird (for ICM Kits)

The photo-etched detail set 1:48 Boeing AH-6J Little Bird from Eduard for refining a model of the light helicopter.
In stock
19.80 €
Hobby BossHB845081:35

1:35 Lvkv 9040C Anti-Air Vehicle

Lvkv 9040C 1:35 is an injection-molded plastic kit of the Swedish anti-aircraft vehicle on the CV90 chassis with a turret carrying a 40 mm gun.
In stock
51.96 €
HAD modelsHAD721741:72

1:72 Decal Messerschmitt Bf 109 G-14 (3x camo)

A decal sheet for the Messerschmitt Bf 109 G-14 in 1:72 scale from HAD models offers markings for three camouflage variants. It is an accessory for your own model.
In stock
7.96 €
3DF3DF1048091:48

1:48 Ju-88 coolers A-5/A-10/D-2/D-4 /C-4 (ICM) 3D print

1:48 Ju-88 coolers A-5/A-10/D-2/D-4/C-4 3D print is a set of radiators for a model of the Ju 88 in 1:48 scale. It is an accessory for completing a model, not a kit of the aircraft. Intended for the ICM kit.
In stock
12.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.