Víkendové slevy -20 %! | Weekend Sale – 20% OFF! | MASTER • KELIK • RESKIT • QUINTA STUDIO • EDUARD • GUNZE • VALLEJO
1:35 Barrel for German A/T Self Propeled Gun “Nashorn” with 8,8cm Pak 43/1 L/71

1:35 Barrel for German A/T Self Propeled Gun “Nashorn” with 8,8cm Pak 43/1 L/71

17.56 €
Add to Cart

1:35 Barrel for German A/T Self Propeled Gun “Nashorn” with 8,8cm Pak 43/1 L/71

A turned metal barrel in 1:35 scale for the German tank destroyer Nashorn with the 8.8 cm Pak 43/1 L/71 gun. It replaces the barrel from the kit and rids a model of the lengthwise join left by the plastic part.

Scale1:35
Manufacturer Aber
Product EAN8591111491952

Responsibility details are not available.

17.56 €
14.51 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The Nashorn was a German tank destroyer of the Second World War, built on a chassis derived from medium tanks. It carried the 8.8 cm Pak 43/1 anti-tank gun in an open superstructure at the rear. The figure L/71 after the designation of the weapon does not give the caliber but the length of the barrel expressed in multiples of the caliber, so the barrel is seventy-one times longer than the diameter of the bore. It is that long slender barrel that gave the gun its high muzzle velocity and it is at the same time the most conspicuous element of the whole silhouette of the vehicle.

What the set solves

The barrel is turned from metal, which gives it a perfectly circular section along its whole length and a sharply open muzzle. The plastic part from the kit is made of two halves, so a lengthwise join is left on it, and on a long thin barrel that is the hardest of all to sand down. A metal replacement does away with that step and it stands careful handling without bending. The way it is attached and any work needed on the kit parts are described in the instructions enclosed with the set.

Building and painting tips

Cut off the original barrel as the instructions say and level the seating surface, so that the new barrel sits true to the axis. Try the part dry first and look at the model from the front to see whether the barrel points to one side or downward. It is glued with cyanoacrylate glue applied in a small amount. Before painting, wash and degrease the metal and use a base coat meant for metal, or you will peel the finish off during handling.

Terms of supply

This is a replacement part for a model. The kit of the vehicle, paints and glue are not included in the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The length of the barrel expressed in multiples of the caliber. The caliber is 8.8 cm and the barrel is seventy-one times longer than the diameter of the bore.

The plastic part has a lengthwise join from its two halves, and on a long thin barrel that is the hardest of all to sand down. A turned part is circular along its whole length.

It is not. This is a replacement part, which is fitted to a model bought separately, unless stated otherwise.

With cyanoacrylate glue in a small amount. Before painting, degrease the metal and lay on a base coat for metal, or the finish will peel off.

Last seen

AberABR35L1281:35

1:35 Barrel for German A/T Self Propeled Gun “Nashorn” with 8,8cm Pak 43/1 L/71

A turned metal barrel in 1:35 scale for the German tank destroyer Nashorn with the 8.8 cm Pak 43/1 L/71 gun. It replaces the barrel from the kit and rids a model of the lengthwise join left by the plastic part.
In stock
17.56 €
ArmoryARAW483171:48

1:48 F-104A/C Starfighter early type wheels, w/ optional nose wheels & weighted tires

Armory 1:48 wheels for the F-104A and F-104C Starfighter in the early configuration offer, according to the manufacturer, a choice of nose wheels and weighted tires. This is a resin accessory, not an aircraft model.
In stock
9.96 €
TrumpeterTR003741:35

1:35 (Sd.Kfz.165/1) German Geschützwagen IV b für 10.5cm le F.H.1

Trumpeter 1:35 Sd.Kfz.165/1 Geschützwagen IVb for the 10.5 cm leFH 18/1 is a plastic kit of the German self-propelled howitzer from the Second World War.
In stock
25.56 €
TakomTKM350031:35

1:35 Panther Ausf. F with Schmalturm and Gummisparende Laufwerke (Sd.kfz. 171)

1:35 Panther Ausf. F with Schmalturm and Gummisparende Laufwerke (Sd.Kfz. 171) is an injection-molded plastic kit from Takom of the Super Blitz line: the Panther with the narrow Schmalturm turret and steel road wheels.
In stock
25.16 €
1:72 FC-1 Fierce Dragon Double-Sided Painting Mask For Trumpeter Kit-25 %Stock ClearanceFavorite
Clear Prop ModelsCPA721311:72

1:72 FC-1 Fierce Dragon Double-Sided Painting Mask For Trumpeter Kit

Double-sided painting mask for the FC-1 Fierce Dragon fighter in 1:72 scale from Clear Prop Models. The mask is cut for the Trumpeter kit.
6 leftof 8
6.36 €4.76 € You save 1.60 €
AviaeologyADD48C105-31:48

1:48 de Havilland Mosquito - National Markings 2TAF/BAFO Variation (early 1945 - early 1947)

Aviaeology ADD48C105-3 is a sheet of national insignia decals for the de Havilland Mosquito in 1:48 scale, in the variation of the RAF Second Tactical Air Force and the British Air Forces of Occupation in Germany from 1945 to 1947.
In stock
5.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.