Přidali jsme nové modely do výprodeje za skvělé ceny! | ENG: We've added new model kits to our sale at great prices!
A semi-rigid sanding stick in 240 grit, from DSPIAE. It follows curved surfaces but does not ripple a flat one; usable dry and wet.
Responsibility details are not available.
A sanding stick with a semi-rigid core, something between paper and a file. The core flexes slightly, so the stick follows a curved surface, yet at the same time it holds its shape firmly enough not to ripple a flat one. That is exactly the difference against a soft sanding sponge, with which edges round themselves off on their own. The 240 grit is the coarsest step in the range.
Two hundred forty is the coarsest grit in the range. It is used on the remains of sprue pins, on leveling surplus filler and on the first leveling of the joint after the fuselage has been glued together. It removes material fast, but it leaves distinct scratches behind that the finer steps have to take down. Guide the stick along the surface rather than in circles, otherwise the scratches cross and are then visible under the paint. Wet, the surface clogs faster with water and dust, so rinse it as you go. A coarse stick is never used for finishing. As soon as the surface is true, move on to four hundred beyond, otherwise the scratches will still show under the paint.
For modelers who sand in places where an ordinary sanding pad is of no use, and for anyone who wants a complete range of grits to hand, from coarse leveling up to preparation under a gloss coat. The sanding stick is supplied on its own; the model and paints are not part of it.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!