A smooth black polystyrene sheet 0.75 mm thick in a 15 by 30 cm format. A material for making your own parts, bulkheads, floors and bases. The unit of sale is one piece.
Responsibility details are not available.
The sheet measures fifteen by thirty centimeters and is three quarters of a millimeter thick, which puts it in the middle of the range of thicknesses offered. A thickness like this already holds its shape and does not warp, while it can still be divided comfortably with a knife. The color runs through the whole material, so no white edge is left after a cut and many parts do without paint altogether.
The classic method is to score and snap: run the tip of the knife along a ruler several times in one and the same groove, then bend the material and it separates by itself, leaving a straight edge. The joints are held by liquid cement for plastic, which melts the edges of the parts and forms a solid weld once cured. Profiles and rods of the same material make a good companion, as they behave exactly like the sheet.
Wipe the surface free of grease before gluing and roughen the joint areas with fine sandpaper. If you do paint the sheet after all, a thin coat of surfacer is enough, because the base is smooth and deeply dark. When deciding on the thickness, a simple conversion to the real thing helps: three quarters of a millimeter works out in 1:35 scale at roughly two and a half centimeters of real structure, which matches planking, heavier sheet metal or the wooden floor of a truck bed.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!