A rod with a square section of 3.2 x 3.2 mm and a length of 35 cm. A heavier section for beams, posts and internal frameworks in the larger scales.
Responsibility details are not available.
An identical height and width have a practical consequence that you appreciate only at the bench: it makes no difference which way you turn the rod, it always fits. There is no picking a side, you get the same result even after cutting it in the middle, and when putting a grid together all the elements fit into one another without measuring. A section of 3.2 millimeters is already among the heavier ones, so the elements made from it are meant to carry weight on a model rather than merely decorate it.
It suggests itself for the load-bearing beams of warehouses and shelters, for fence posts, for the corner stanchions of truck cargo beds, for the props of scaffolding under construction or for ties and roadbeds on layouts. In 1:48 scale such a section works out at a beam with an edge of around fifteen centimeters, that is, a solid piece of sawn timber. Inside a model the same material serves invisibly, as a brace joining two halves of a hull or as a bed into which ballast is seated.
Its second role is as a helper. Offcuts of this thickness serve as jigs: two pieces glued into an L hold walls vertical while they set, and a longer piece becomes a straightedge against which a part rests while being sanded. The material takes a saw and a file and does not crumble when cut.
One thing is worth watching: heavier profiles forgive inaccuracy less. Whereas a thin strip is pulled straight by the base as it is glued, this rod insists that the mating surface be flat, or a gap will show even after painting. A moment spent with a file therefore pays off. One rod measures 35 centimeters and is supplied on its own.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!