The TFace masking set for the AH-64E in 1:35 scale from the Czech manufacturer Eduard is meant for masking the glazing from the outside as well as the inside.
Responsibility details are not available.
This is a set of pre-cut masking templates from the Czech manufacturer Eduard for a plastic model of the AH-64E Apache Guardian attack helicopter in 1:35 scale. The TFace designation means that the set covers masking the glazing from both sides, that is, outside and inside. It is not a model or a kit but an aid for painting.
On the real machine the glazing frame is a different color inside than outside, usually the interior shade. If you mask only from the outside, the outer camouflage shows through into the cabin and it looks empty. With a double-sided set you paint the inner face of the frames in the interior color first and only then the outside. On the extensively glazed cockpit of an attack helicopter that difference is visible at a glance.
Wash and degrease the clear parts. Transfer the templates with tweezers and press the edges down firmly, so no paint runs under them. Spray in thin layers and take the masks off shortly after they have dried, at a shallow angle. Between painting the inner and the outer face, let the surface cure thoroughly so it is not damaged during the second masking.
This is an accessory for a model. The basic kit and the paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!