A thinner for enamel paints, intended to prepare them before spraying with an airbrush. The 2.0 designation sets this version apart within the line.
Responsibility details are not available.
Airbrush Thinner 2.0 Enamel is a thinner for enamel paints, as its name states, and it is intended to prepare them before spraying with an airbrush. Paint straight from the jar is usually too thick for an airbrush: underthinned it tears, goes grainy on the surface and clogs the nozzle, while overthinned it runs and floods the engraving. The thinner therefore decides how a coat turns out just as much as the paint itself.
The thinning ratio is given by the manufacturer; keep to those instructions and adjust it to the pressure and the nozzle you work with. Mix the paint in a separate cup or straight in the cup of the airbrush, not in the storage bottle, so you are not left with a thinned supply. Stir the mix into an even liquid and let it stand for a moment. Before working on the model, try the coat on a piece of waste plastic, as that is where you see whether the paint covers and at the same time does not run.
The thinner is intended for enamel paints. With acrylic and lacquer lines, use the thinner recommended by their maker, as mixing across types of paint leads to the pigment curdling. Work in a well ventilated space, ideally at an extraction booth, and protect your airways and your skin. Keep the bottle well closed, out of the reach of children and away from sources of heat and open flame.
The paints, the airbrush and modeling tools are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!