A full millimeter across the flats, a lowered hexagon head for the brake system and its mounts.
Responsibility details are not available.
The brake is an assembly where several kinds of joint come together in a small space. The caliper is screwed to the fork or to the arm by a pair of heads, the halves of a floating caliper are held by another pair, the master cylinder is clamped to the handlebars by a clamp, and the fitting of the fluid line is drawn up by a hollow bolt with a pair of sealing washers. All of this is exposed on a real machine and is set apart from its surroundings in color as well.
A full millimeter is the middle of the range offered and it suits the brake group exactly because this is where the load-carrying joints belong, but not the very largest ones. A lowered head matches the way today's calipers are designed: the head sinks into a recess in the casting, so that it does not stand above the outline and serve as something to catch on.
On a finished model the wheel and the brake tend to be the first place the eye slides to, because they lie low and at the level of the observer's eye. Adding heads here therefore has a better return than the same work on the top of the tank. A metal part, moreover, will take the surface around it being sanded and blackened without losing its edges.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!