An electric hot melt rod is a heated modeling tool that shapes and marks plastic with heat; the working tips are changed as needed.
Responsibility details are not available.
The tool heats up the tip fitted to it and that then leaves a permanent mark in a plastic part. With heat you can do what cutting and engraving are not enough for: torn armor, a dented panel, a sintered weld, a rough surface of a casting or a cracked edge. Material is not taken away in the process, only moved, so the surroundings of the intervention stay whole and the result looks more credible than a cut hole.
Before you set about a model, sacrifice a piece of sprue and try the pressure and the time of contact on it. Plastic moves under a hot tip for a while even after you take it away, so work briefly and rather come back to the place a second time. Level the ridge that arises around the mark once it has cooled, otherwise it will show through under the paint. Keep the tip clean, baked-on plastic only bakes deeper at the next heating.
Builders of dioramas, wrecks and damaged equipment who want to have the destruction exactly where they intend it, and not where the scalpel ran off to. The tool gets very hot in operation, so set it down on a nonflammable surface, let it cool after work and put it away out of the reach of children. Melting plastic gives off fumes, so work by an open window or with extraction. The power supply, the wattage and the extent of the delivery are not given in the name of the item.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!